Watering Irrigation Drip Irrigation Tools Accessories For Sale In Overland Park

Also has 3 openings. Tee as a hose fitting in your sprinkler and irrigation system. The tee has a 1/2 in. Use the Easy Fit 1/2 in. Connection size.

King Innovation's SnapTap pipe saddles are number one in their class for speed, comfort and durability. Available with an FPT, 90° elbow, or straight barb fitting. The patented cutting tip allows the installer to pierce through pipe quickly, while the...

The Orbit Sprinkler Riser Adapter connects to a 1/2 in. For outdoor use with cold water only. It comes equipped with a filter to keep out debris.

These hose fittings help you maintain your sprinkler and irrigation system. Closure Goof Plugs (30-Pack) are 1/4 in.

25 psi pressure regulator, 3/4 in. Using additional drip tubing and PC drip line with the same flow rate and spacing. The kit is also suitable to install around building foundations to prevent slab damage due to soil movement.

Simply clamp, push down, twist, and you are done. Polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The Blazing Saddle Swing Pipe Barb L is for use with 1 in.

Each connection offers three barbed ends to ensure a strong, water tight fit. Barbed Tubing Tee is used in drip and micro irrigation applications to create a three way layout of 1/2 in.

Easily repair tubing breaks using the pail's self-dispensing 250 ft. Replace non-working devices with Rain Bird's clog resistant, pressure compensating emitters. Or start a new drip zone from an outside faucet to water your flower boxes, patio container...

Easily connect 1/2 in. Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

The Blazing Fast Fittings 1 in. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market. This line of Clampless fittings require no tools or extra fittings to install.

Chemical and clog resistant, the drippers are an economical choice for systems with short lengths of drip tubing. Micro tubing or distribution tubing. Drip tubing and snapping the barbed side of the dripper into the 1/2 in.

The Orbit 1 GPH Inline Dripper is utilized best in watering a specific landscape feature. To be used outdoors with cold water only. The dripper is best used when watering plants spaced 10-20 in.

The improved design Drip Zone Valve Assembly Kit provides installation simplicity with reliable performance and an affordable price to start a drip irrigation installation. DIG's 24VAC Drip Zone Valve Assembly Kit is a complete unit composed of a 3/4”,...

Add some color and excitement to your drip irrigation system with Drip Pets. UV stabilized materials help ensure a long product life. Great to get the kids involved with family and home improvement activities.

When you want to deliver water to your drip system via an above ground garden hose, these sturdy stakes are the ideal mount for a drip manifold. Do not exceed 70 PSI inlet pressure.

Throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. Stake plus 36 in. Drip irrigation tubing. H and the spray adjusts from 0 ft. It is ideal for taller plants such as shrubs and bushes well as for use in...

Male thread (NPT) sprinkler riser into a ¾ in. Thread the ½ in. Do not over tighten. Female thread (FHT). This allows connection of a ¾ in. Installation suggestions: 1. Wrap two to three rounds of TEFLON tape on the ½ in.

Micro tubing with barb. Slow application of water means less runoff and increased soil absorption. Comes assembled comes with a adjustable spray jet, a 13 in. The DIG 180° Adjustable Spray Jet offers a low-volume, water saving solution to water, trees...

This Rain Bird Faucet Connection Kit provides a simple method for connecting a drip irrigation system to an outdoor faucet. To automate your watering schedule, add a Rain Bird hose-end timer.

Remove dirt and particles from your irrigation system with the DIG 3/4 in. Inner filter can be easily removed for cleaning. Protects drippers and micro sprinklers from clogging. Hose Thread Screen Filter.

Slow application of water means less runoff and increased soil absorption. Comes assembled with a fan spray jet, a 13 in. The DIG 360-Degree Fan Spray Jet Sprinkler offers a low-volume, water saving solution to water flower beds and ground cover.

Or add a hose-end timer (purchased separately) for automated watering. Just turn on the faucet to water all plants at once. Easy to assemble - just attach to faucet, cut tubing with scissors, connect and place the staked watering devices.

It is easy to position the mister and direct the water flow by adjusting the memory-flex tubing. The 2 GPH misters vortex design spins the water flow into a fine mist, useful for plants needing constant moisture or wherever overhead watering is indicated.

Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover...

Other landscape watering applications requiring higher flow than spot emitters or drippers. Circle with this unique bubbler that is self-piercing for insertion directly into 1/2 in.

RAINDRIP's turbulent flow PC (pressure compensating) drippers maintain their rated flow rate for 10 - 60 PSI inlet pressure. Tubing feeder lines or anywhere they are needed. Can be used at the end of 1/4 in.

The raindrip Ground Cover and Flower Bed Kit waters up to 50 ft. Comes with everything you need to set up your drip watering system. It is ideal for all landscape, perennial and garden areas and creates excellent growth and plant health with little water.