Used Equipment Attachments For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Dimensions for Shipping (Height x Width x Length): 6 ½ ft. Cab Door: The door is in good shape. Gauges, Controls, Function Buttons: Some of the pieces are with the cab shell. Glass: All of the glass is in good condition.

Description: All of the pin holes on this boom appear to be in decent shape. Weight: 6,200 lbs. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long No cracks or repairs have been found..

No warping appears to be present. Weight:5,000 lbs. The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long

The rest of the boom looks good. Weight:5,000 lbs. On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long

All of the other pin holes look good. Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters. Weight: 2100 lbs. The bushing for the pin hole where the bucket pins to the stick looks like it may have some wear.

This stick has a thumb mount welded to the bottom of it. Weight: 1,100 lbs. All of the pin holes appear to be in good shape and no cracks or repairs have been found. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long

Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Weight: 3,800 lbs. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long No cracks have been found.

Stick Information

ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. HAS A/C WHICH IS NOT WORKING. CONTROL LINKAGE HAS SOME WEAR. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION.

This stick has a thumb mount welded to it. Weight: 1,500 lbs. All of the pin holes appear to be in good shape and no cracks or repairs have been found. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long

No cracks have been found. Weight: 2500 lbs. All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long

Cracks/Damage: There is a crack in the blade face, just off to the left from the center of it. A debris guard was fabricated and is welded to the top of the blade. The debris guard is also broken away from the moldboard on both sides of it.

Weight: 1,800 lbs. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found.

GEARAMATIC WITH DRIVE SHAFTS.

Weight: 1,500 lbs. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Description: All of the pin holes on this boom are in good shape and no cracks have been found.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Description: All of the pin holes on this boom appear to be in good shape. Weight: 2,000 lbs. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long No cracks or repairs have been found.

This stick is missing both outer bushings for the bucket pin. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long.

It includes the following components: Boom-25 foot long boom section. Description: This is a complete, 3 piece material handling boom set-up. All of the pin holes also appear to be in good shape and no cracks can be seen.

NOT INSTALLED ... RECEIVED CAB GLASS NEW...

There two cracks on this stick (see photos) near where the stick cylinder pins to it. Description: The working length of this stick is 9 feet, 7 1/2 inches. Weight: 1,600 lbs. All of the pinholes appear to be in decent condition.

Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long 6.6 METER Weight: 9,000 lbs.

This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks burned into it. Weight: 3,000 lbs. All of the pin holes look good and no cracks have been found.

Weight: 4,500 lbs. Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Description: All of the pin holes appear to be in good shape and no cracks have been found.