Livestock Waterers Farm Supplies For Sale In San Francisco

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

XtraFlo is UV stabilized and corrosion resistant. XtraFlo compact diaphragm valve has full-flow, high volume fill. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. It will take abuse!

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. All edges have been rounded for safety & strength. 43 3/4" x 28 3/4" x 23" Comes with 1.25" drain installed.

Livestock can drink out of both flaps at the same time, not always so with a ball closure. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice.

A brass rod float arm 1/4" x 1" with threads on each end. Connects valve to round float.

SPI hatch cover for model 4x4 energy free waterer.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms.

Holds 100 gallons. Capactiy: 250 head of beef, 120 head of dairy or 200 cow/calf pairs. This unit features removable end panels to help get new cattle started fast or to provide more capacity for a few extra head.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

You will need 2 per valve assembly. Pride of the Farm Link pin only. The connect the Cam & Power Link to the VP124 valve body. #4 on breakdown

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

This unit fits the Model 101, 202 & 404 with or without heat.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. The Tru-Test Apex Xtraflo 3/4" Trough Valve Long Tail is a full flow - diaphragm activated, armless, self-cleaning valve mechanism, with a longer valve...

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.