Agiseek home

Grow Tents Hydroponic Gardening For Sale In Atlanta

Become a Partner
Ultra Quiet 110 CFM Ceiling Mount Exhaust Fan with Light and Night Light, ENERGY STAR
Prices start at : 103.46 USD / each

Regarding noise level and features, with the eco-friendly SE110L you'll get maximum satisfaction for your budget. It features built-in light and night light, a smart choice if you have little ceiling space to sacrifice.
  •  HVI certification warrants performance and efficiency to give you a piece of mind
  •  Durable white polypropylene designer grille featuring built-in light and night light
  •  ENERGY STAR rating ensures energy efficient operation
  •  110 CFM at 0.9 sones
  • Manufacturer Warranty: 3 Year
  • Returnable: 90-Day
Georgia
Atlanta
Radon Mitigation Fan Kit 4 in. Fan with 4 in. to 3 in. Couplers and Air Pressure Indicator
Prices start at : 184.75 USD / each

The kit includes a 4 in. The motor casing has an automatic thermal reset for overload protection. It is ETL listed for both indoor and outdoor use. Rubber couplers and mounting hardware for your convenience.
  •  Effective way to reduce radon related health risks to families
  •  Front line of defense against elevated radon levels in the home or office
  •  5 year limited warranty
  •  Motor has an enclosed casing and an automatic thermal reset for overload protection
  •  Mounting hardware included
  • HVAC application: All HVAC types
Georgia
Atlanta
XP201 Radon Fan
Prices start at : 139.00 USD / each

Fan sizing for retrofit may require professional diagnostics and design. NOTE: When installing an ASD system for radon reduction, any openings, major cracks and penetrations in the building slab or membrane must be sealed.
  •  Meets all electrical code requirements
  •  ETL listed - for indoor or outdoor use (UL equivalent)
  •  Low energy consumption
  •  Rated for commercial and residential use
  • Product Depth (in.): 9.5 in
  • Product Width (in.): 8.5 in
Georgia
Atlanta
Fin Clamp Baseboard Element for 1/2 in. Copper Baseboard Piping 2 ft. Section
Prices start at : 68.00 USD / each

Replace missing fins and increase boiler efficiency. Assembled unit installs in seconds. It goes around the pipe and is held in place with a custom clamp. It can easily be removed and relocated without cutting the pipe.
  •  2-1/8 in. fin will produce 430 BTU's per linear foot of active element
  •  Can be sized to fit your needs
  • Brand/Model Compatibility: FABTEK
  • Product Width (in.): 24
  • Returnable: 90-Day
  • Product Depth (in.): 2.13
Georgia
Atlanta
115-Volt Aftermarket Replacement Specific Purpose Blower for Intercity
Prices start at : 169.67 USD / each

This Fasco aftermarket equivalent is Shaded Pole, 115-Volts, 3400 RPM, 1 Speed, 2.3 Amp, CW Rotation. Comes with all hardware for a perfect drop in fit. Specific purpose blower with ball bearings.
  • Product Height (in.): 10.5
  • Product Depth (in.): 12
  • Includes clamps: Yes
  • Returnable: 90-Day
  • Manufacturer Warranty: Limited Warranty
  • Brand/Model Compatibility: ICP, Fasco
Georgia
Atlanta
1.5 in x 10 in. x 9.5 in. GA10 Vapor Pad
Prices start at : 13.98 USD / each

This is a replacement evaporator pad for Generalaire Model 570, Honeywell Models HE220 and HE225, Aprilaire models 110, 220, 558, 550 and 500, and Source1 Model S1-HU112MB. As warm air from your furnace passes through the water-soaked Vapor Pad, humidity...
  •  Also fits: APRILAIRE models 110, 220, 558, 550 and 500, AND source1 model S1-HU112MB
  •  Do not wash: if you wash the vapor pad in an attempt to remove the built up water deposits, you'll also wash off the hydrophillic coating; your humidifier is then unable to provide humidity to your home
  •  Fits: generalaire humidifier model 570, honey well humidifier models he220 and he225
  • HVAC application: Air Treatment
  • Product Weight (lb.): 1lb
  • Product Height (in.): 9.5
Georgia
Atlanta
8 in. x 25 ft. Non-Insulated Flexible Aluminum Duct with Scrim
Prices start at : 29.1 USD / each

Product is fire resistant. Metallic Duct is made out of pure aluminum, 2 ply flexible metallic duct with fiber woven in the duct to provide additional durability and tear resistance.
  • Material: Aluminum
  • Returnable: 90-Day
  • For use in low to medium pressure: Yes
  • Product Diameter (in.): 8 in
  • Product Length (in.): 300
  • Color: Silver
Georgia
Atlanta
3 ft. x 3 ft. x 6.7 ft. Grow Room Tent
Prices start at : 142.86 USD / each

Each grow room features heavy duty light tight zippers, hook and loop touch fastener closures, overlapping woven fabric. The outside of the tent is a thick black woven fabric, while the inside is lined with a thermally adhered layer of tough, washable,...
  •  Improved thicker fabric than previous models, with easy to use heavy duty zippers
  •  Sturdy powder-coated 16 mm steel tent frame and cross members protects against rust and gives a clean reflective look
  • Storage Capacity (cu. ft.): 0
  • Door Opening Height (In.): 79
  • Number of Vent Openings: 2
  • Greenhouse Features: Screen vents,Single door,Zipper closure
Georgia
Atlanta
MK2 Mounting Kit for Micra 60 Heat Recovery Ventilator
Prices start at : 97.77 USD / each

Instruction is included that is clear, thorough and easy to follow. VENTS MK2 Mounting Kit changes the installation procedure of Micra 60 Heat Recovery Ventilator to a do it yourself easy project.
  • Brand/Model Compatibility: VENTS Micra 60 single room heat recovery ventilator
  • 2 telescopic ducts included that measure 5 in. - 19-11/16 in.: Yes
  • Returnable: 90-Day
  • Product Width (in.): 22.25
  • Product Weight (lb.): 4lb
  • HVAC application: Ventilation
Georgia
Atlanta
4 in. x 8 ft. Dryer to Duct Connector Kit
Prices start at : 18.43 USD / each

An optional plastic extension piece is also included for those dryers with recessed exhaust ports. Aluminum foil dryer transition duct a plastic connector piece. The kit includes a 4 in.
  •  Connector can be easily removed from the back of the dryer to quickly and easily clean out lint and debris form the dryer duct
  •  Flexible aluminum foil dryer transition duct in this kit is 2158A UL listed and marked for safe dryer venting
  • Insulated: No
  • Product Height (in.): 103
  • Color: White
  • Product Length (in.): 96
Georgia
Atlanta
Aluminum Wall Cap in Natural Finish for 7 in. Round Duct
Prices start at : 46.81 USD / each

For use with 7 in. It includes a backdraft damper and bird screen for added protection. Round Duct Aluminum Wall Cap features a long-lasting aluminum design. This 641 Broan 7 in.
  •  Manufactured of 0.025 in. aluminum in natural finish for added durability and resilience
  •  Designed for easy installation
  • Product Weight (lb.): 1.5lb
  • Brand/Model Compatibility: Broan, NuTone
  • Returnable: 90-Day
  • HVAC application: Ventilation
Georgia
Atlanta
5 in. Back Draft Damper
Prices start at : 28.61 USD / each

The two blades have an independent hinge to prevent any malfunction. Furthermore, the dampers come with a gasket to insure a quiet and sealed operation. These back draft dampers are manufactured with galvanized steel and can be mounted directly in the...
  •  Neoprene damper seal minimizes leakage
  •  Simple installation in any position - entire assembly inserts into duct
  •  Requires from 0.04 to 0.08 in. with pressure to open
  • Manufacturer Warranty: 1 year
  • Brand/Model Compatibility: Vortex Powerfan
  • Product Height (in.): 5 in
Georgia
Atlanta
5-1/2 in. x 20 in. Flex Duct Supports
Prices start at : 11.59 USD / each

The wider support provides better load distribution to support the flex duct. It is constructed of galvanized steel. The support has slots at either end to accept metal hanger strap for ease of hanging.
  •  Easy to install with metal hanger strap and nails or screws (sold separately)
  •  Offers greater support to flexible duct
  •  Durable galvanized steel construction
  • Product Height (in.): 0.015
  • HVAC application: All HVAC types
  • Product Depth (in.): 5.5
Georgia
Atlanta
Costway Indoor Grow Tent Room Reflective Hydroponic Non Toxic Clone Hut 6 Size (48\'\'X24\'\'X72\'\')
Prices start at : 66.99 USD / each

Feature Grow Tent,grow tents Plant Growing Tents Indoor Grow Tent Room Grow Tent Room Specification Exterior Material: Heavy Duty Oxford Fabrics Inner Lining Material: 100% Highly Reflective Water-Proof Aluminum Foil Multiple Vents For Fans And Filters...
  • Manufacturer Part Number: AP2034
  • Brand: Costway
Georgia
Atlanta
Powerfan 5 in. 255 CFM Inline Fan with Vari-Speed Kit
Prices start at : 212.78 USD / each

The variable speed control fan kit includes a Vortex Powerfan VTX500 and a Vari-Speed speed control. This kit also comes with galvanized mounting brackets allowing either horizontal or vertical installation.
  •  Aerodynamic design allowing more air flow
  •  Extended collar and lip, allowing easy duct hook-up
  • HVAC application: Ventilation
  • Product Depth (in.): 8.5 in
  • Product Weight (lb.): 7 lb
  • Product Width (in.): 9.5 in
Georgia
Atlanta
4 in. x 25 ft. UL 181 Round Aluminum Foil Duct
Prices start at : 20.5 USD / each

Multi-ply metalized polyester and aluminum polyester laminate with steel wire support. Can be used for remodeling, do it yourself and new residential projects. Used in non insulated general purpose venting systems.
  •  Seal joints with approved duct mastic sealants and tapes
  •  Consult your local building codes for approved installation practices
  •  Ideal for non insulated general purpose venting systems
  • Maximum air flow (CFM): 60.0
  • Certifications and Listings: No Certifications or Listings
  • Material: Aluminum
Georgia
Atlanta
Aluminum Wall Cap for 3-1/4 in. x 10 in. Ducts
Prices start at : 23.46 USD / each

It is constructed of durable aluminum. That will ensure the easy prevention of undesirable airflow. Ducts is spring loaded. The backdraft damper on this Broan 649 Aluminum Wall Cap for Broan 3-1/4 in.
  • HVAC application: Ventilation
  • Durable aluminum construction: Yes
  • Product Width (in.): 12.75 in
  • Color: Aluminum
  • Number of pieces included: 1.0
  • Hardware Included: No
Georgia
Atlanta
VENTS 678 CFM Power 10 in. In-Line Centrifugal Metal Duct Vent Fan
Prices start at : 220.28 USD / each

The most common uses are bathroom exhaust, range hood exhaust and duct boosting. The quiet and efficient backward curved impeller is capable of operating in high pressure systems. VKM 250 fan is designed to boost airflow through long or complex duct runs...
  • Color Family: Blue
  • Recommended Sq. Ft.: 2000
  • Quiet and efficient, vibration free operation: Yes
  • Ventilation Type: Whole House
  • Manufacturer Warranty: The manufacturer warrants to the original purchaser of its products that it will be free from defects in materials or workmanship for a period of 60 months from the date of original purchase
  • HVAC application: Ventilation
Georgia
Atlanta
Adjustable Aluminum Dryer Duct
Prices start at : 16.98 USD / each

This duct allows the dryer to be placed close to the wall for optimum space utilization. Consists of a 2-piece all aluminum construction. The Adjustable Aluminum Duct is ideal for use in tight fitting clothes dryer applications.
  •  Aluminum material is lightweight and easy to install
  •  Duct rotates to vent in all directions
  • Maximum air flow (CFM): 0
  • Product Height (in.): 4.04
  • Returnable: 90-Day
  • Product Diameter (in.): 6 in
Georgia
Atlanta
8 in. Back Draft Damper
Prices start at : 31.65 USD / each

The two blades have an independent hinge to prevent any malfunction. Furthermore, the dampers come with a gasket to insure a quiet and sealed operation. These back draft dampers are manufactured with galvanized steel and can be mounted directly in the...
  •  Simple installation in any position - entire assembly inserts into duct
  •  Available in sizes from 4 to 12 in.

8 in

    • Product Width (in.): 8 in
    • Manufacturer Warranty: 1 year
    • Product Weight (lb.): 0.8 lb
    • Product Height (in.): 8 in
    Georgia
    Atlanta
    14 in. x 48 in. Drain Pan with PVC Connector - 28 Gauge
    Prices start at : 62.21 USD / each

    Drain line (not included). Galvanized steel construction with attached PVC fitting. Locate under HVAC unit and attach to 3/4 in. Drain pans collect condensation to prevent leakage in walls and ceilings due to moisture run-off from primary AC pans.
    •  26-Gauge galvanized steel
    •  PVC fitting included
    •  2-1/2 in. deep with hemmed edge
    • Manufacturer Warranty: Free from Manufacturer Defect at Time of Delivery.
    • Product Height (in.): 3
    • Returnable: 90-Day
    Georgia
    Atlanta
    10 in. Galvanized Back-Draft Damper with Rubber Seal
    Prices start at : 25.00 USD / each

    Easily fits into your vent system, the installation requires minimal labor and time. KOM 250 U round back valve is especially designed to prevent back-draft. The spring loaded back-draft damper is manufactured of galvanized steel and contains rubber seal.
    •  Rubber gasket in closed position ensures minimal leakage
    •  Well-balanced
    • Manufacturer Warranty: The manufacturer warrants to the original purchaser of its products that it will be free from defects in materials or workmanship for a period of 12 months from the date of original purchase
    • Product Width (in.): 9.81
    • Product Height (in.): 6.5
    • Returnable: 90-Day
    Georgia
    Atlanta
    Window AC Vinyl Side Panel
    Prices start at : 12.98 USD / each

    Includes pressure-sensitive adhesive on the pre-attached track for ease of installation. The AC-Safe Window Air Conditioner Vinyl Panel Replacement Kit is designed to repair cracked and damaged accordion-style panels on your air conditioning unit.
    •  Includes pressure sensitive adhesive
    •  Replaces old, cracked or torn side panels
    •  Helps to keep bugs and hot air out and cool air in
    • Manufacturer Warranty: 90 day limited warranty aginst defects in marerials and workmanship. If found to be defective return it prepaid with proof of purchase to Nation Wide Product, 1301 S. Treadway Blvd Abilene TX 79602
    • Returnable: 90-Day
    • HVAC application: Air Conditioning
    Georgia
    Atlanta
    6 in. Plastic Diffuser
    Prices start at : 10.07 USD / each

    It is suitable for both air intake and exhaust. It has been designed to provide both an unobtrusive appearance that complements any decor and high quality performance. A 150 VR round plastic air diffuser is suitable for 6 in.
    • Contains no flange: Yes
    • Product Width (in.): 8
    • Manufacturer Warranty: The manufacturer warrants to the original purchaser of its products that it will be free from defects in materials or workmanship for a period of 60 months from the date of original purchase
    • HVAC application: Ventilation
    • Product Weight (lb.): 0.5lb
    • Brand/Model Compatibility: VENTS TT 150, TT Silent 150, TT Pro 150, TT Silent M 150, VCN 150,VK 150, VM 150, VKP 150
    Georgia
    Atlanta
    Comfort Meter with Temp and Humidity
    Prices start at : 11.27 USD / each

    Requires 1 AAA alkaline battery (not included). Clear frame design. Colorful bar scale showing you the comfort level. Displays current degrees in either Fahrenheit or Celsius and relative humidity percentage.
    •  Displays humidity
    •  Temperature range: 32 F to 122 F
    •  5 level humidity bar from dry to wet: dry: below 34% RH, comfort/dry: 35-40% RH, comfort/ideal: 41-55% RH, comfort/wet: 56-64% RH wet: above 65% RH
    • Calendar: No
    • Display width (in.): 1.75 in
    • Product Weight (lb.): .20lb
    Georgia
    Atlanta
    No Tools Needed AC Support Bracket 2
    Prices start at : 49.96 USD / each

    This support bracket has a double tube frame allows for easy ac unit installation. Weather seal included. This bracket mounts to wall with compression from the locking cams. And will fit in any window opening greater than 17 in.
    •  Transfers the weight of the air conditioner from the window sash and sill to the support for safety
    •  Weather seal included
    • Brand/Model Compatibility: Most
    • HVAC application: Air Conditioning
    • Product Width (in.): 16
    • Product Weight (lb.): 2.98lb
    Georgia
    Atlanta
    12 in. 4-Pole In-Line Duct Fan with Electrical Box
    Prices start at : 87.85 USD / each

    The thermally protected Class B motor will not overheat and is built to be quiet and dependable for years to come. Flexible and rigid ducts and features a crimp and bead design on one end for easy installation.
    •  Do not expose your Inductor to temperatures above 140°
    •  Can be installed at any angle
    •  4-pole thermally protected motor, 180 running Watt, 1.57 startup Amp, 120 VAC, 60 Hz
    • Product Width (in.): 12 in
    • Product Depth (in.): 8 in
    • Manufacturer Warranty: One Year Limited Warranty
    Georgia
    Atlanta