Farm Equipment Swine Equipment For Sale In Gilbert

108.5 watts per side Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved.

Chore-Time Model 108 PVC Coupler

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

Chore-Time Model 90/HMC Bearing Cap Assembly. This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies.

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

Delivery Rate = 220 lb./min. With standard 348 RPM power unit. Chore-Time Model 108 Flex Auger. Used to convey high moisture corn, large pellets, shelled corn or ground feed. Maximum particle size = 3/16" dia.

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Chore-Time Model 55/MF Tube Clamp

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 55 Model Parts Package. This Weldment will accept the M55 Tube.

Chore-Time Micro switch for Hopper Level Control.

LP Orfice, Burner, for Classic 170/408

Used on Flex Auger sysems from 160' - 250' in length. Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615

Chore-Time Model 108 45D PVC Elbow

This is the toggle switch that is located on the control unit (220v, single phase). Chore-Time DPST Toggle Switch-4 Prong. Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-).

Chore-Time Model 75 Bearing Cap Assembly. This is the bearing assembly used on CT35346 & CT35347 Anchor & Bearing Assemblies manufactured since May 1996.

Chore-Time Model 55 PVC Coupler. Glued into place with PVC cement. Commonly used when repairing/replacing M55 pvc tubing. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

Chore-Time Model 75 Single Straight-Out Lower Boot Assembly. Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Igniter only, no bracket, for HSI and Guardian heaters, (509201)

This feeder is easy to fill, made of 20 ga. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately...

NG Orfice, Burner, for Classic 115/379

Chore-Time Model HMC Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time Model 55 Clear Drop Feeder Assembly. Translucent feeder provides quick visual check of its contents. Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems.

Air Proving Switch, used in models: AB200, AB250, AW075, AW215, AW230, AW250,AW325, Classic 115, 170 (G-K Series)

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Used on CT46800 Control units. Chore-Time Micro Switch for CT46051 Switch Assembly. (Old number CT7114)

Chore-Time Model 75 Single 30� Lower Boot Assembly. Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.