Farm Equipment Livestock Waterers For Sale In Waco

6' 1" Diameter x 25 1/2" H 71# 5 Year Warranty Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. The one piece construction eliminates cracking & splitting common in plastic-welded, two...

23" W x 27" L x 20" H It is FDA & HPB approved, food grade, recyclable plastic. An Earth Tube is suggested with installation. This waterer has a MAX usage of 120 Beef, 50 Dairy or 135 Sheep.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

This white pin holds the upper arm to the top base.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

Pride of the Farm 5/32" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

We are all delighted to have the replacement installed - easy to do - and the waterer functioning perfectly. Our original float valve got broken during the barn remodel.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Robert's Brass 1/2" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. 3 year warranty. Aqua Blue color only. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze...

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. The Megaflow is compact, robust and manufactured from non-corroding materials.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

Pride of the Farm VP124 plastic valve body only. No lock pins or inner parts included. #3 on breakdown.

-Minimal Assembly -Strong Utra-violet Light Protection to prevent Fading/Cracking -One Inch (2.54 cm) Drain Plug (Drain is to the left as you face drinker) -Drinker Opening is: 14.0"(35.6 cm )W 16.5"(41.9 cm) H 12.0"(30.5 cm) D

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

This bolt package is for Models 101, 202 & 404 with or without heat.

600 watt x 120 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

Two 2 inch side drains and 1 threaded bottom port for optional inside drain. Drinker wells are 14" deep allowing most any animal to drink naturally. Notched flanges for easy anchoring.

2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, 250 watt heater, overflow port & dependable non-siphoning Durapride Valve.

Mostly used on cattle waterers. Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.