Farm Equipment Livestock Waterers For Sale In Vancouver

SPI 351/352 (old style) Rubber Drain Plug only .

It has a 15" drinking height, 9 1/2" x 9 1/2" door opening. Earth Tube is suggested with installation. Finally, the waterers are designed with rounded corners to handle livestock abuse while ensuring livestock safety.� Specs: It is 23" wide x 40.5"...

Foam filled-R value of 7.5 per inch. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Heating cost is minimal-less than $10.00 per heating season. Simple water level adjustment, easy to clean.

SAFE IN PLASTIC. Operates effecicently at the bottom of the bucket because warm water rises. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. The 250W elemnt is encased in aluminum for durability & safety.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

The Robert's 3/4" brass valve housing only.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

No lock pins or inner parts included. Pride of the Farm VP124 plastic valve body only. #3 on breakdown.

SPI white corrugated baffle for model 4x4 energy free waterer.

Maximum 24-hour electrical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection cover for easy access to float...

Robert's 1/2" Leather cup ring that fits on the brass plunger.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Easy to install & installs in only minutes. Unit is unnoticed by livestock - no cord in water. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power. Thermostatically controlled to only run when necessary.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

You can expect an entire winter's heating bill of $25.00 or less - and this from a drinker that can water 250 head of beef using only 250 watts. More importantly, the vertical wall of our valve cover has PATENTED ports which allow natural water circulation...

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

There are no loose parts, Lower access panels on each end. Two drain option. Grade A compliant. Our 8 notches do not protrude where they can be hit. Warmer water pushes through the ports and cooler water returns under the baffle.

Aqua Blue color only. All edges have been rounded for safety & strength. The tank also comes with a 1.25" drains installed. 3 year warranty. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

5 year warranty. The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit. Very efficient use of energy. Meets "Grade A" Dairy requirements (non-siphoning).