Farm Equipment Livestock Waterers For Sale In Savannah

SPI 90 degree elbow for all models.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

The orange male fitting end of the Franklin Valve. No inside working parts included.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

Pride of the Farm Element for electric waterer units.

The Robert's 3/4" brass valve housing only.

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

#2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. No other parts come with the Cam Link. This is the arm that opens & closes the plunger.

Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9 cm) AND external 2" (5.1 cm) drains. Available in light gray. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute.

They can also be easily stacked for deeper installations. The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. Highly recommended for ALL cold climate installations.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

Tough enough for years of outdoor use. Notched flanges for easy anchoring. 100% poly construction. Second, our supply line is in the water. Over 300 square inches of access for easy hook up.

SPI hatch cover for model 4x4 energy free waterer.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 1/4" Orifice on a VP124 Valve.

SPI 351 (old style) gasket only.

Maximum 24-hour electrical use is 1.56 kwh. Dimensions: 41" x 20" x 23". Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

37 1/4"L x 28" W x 12 3/4" H 11 # 5 year warranty The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation.

Serves 75 beef, 40 dairy, 30 horses. Stainless steel bolts & removable top afford easy access to plumbing. Livestock can drink out of both flaps at the same time, not always so with a ball closure.