Farm Equipment Livestock Waterers For Sale In Fort Wayne

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

Robert's 3/4" rubber plunger seat only.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

SPI foamed 4x4 energy free waterer door only.

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

SPI 3.75" Brass Short Float Stem only.

Weather strip & an insulated sleeve for the supply line come with each unit. 2-2" drain holes for fast clean out. Serves 225 beef, 100 dairy, 175 cow/calf. Stainless steel bolts & removable top afford easy access to plumbing.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

80 Watt Immersible element used in the PC 1 waterer.

Arkfeld waterer element replacement. 600 watt x 120 volt heating element only

The Megaflow is compact, robust and manufactured from non-corroding materials. Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Guaranteed for 1 year & SAFE IN PLASTIC. This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm.

The last number on the VP2 matches up with the VP1 valve. Greater tolerance to operation in dirty conditions; 4. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well...

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

Inside repair kit for Topaz & Megaflow Valve.

Megaflow Yellow Float Only.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well. Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations.

Arkfeld waterer element & thermostat replacement. 600 watt x 240 volt heating element with surface mount thermostat included.

SPI Drain Plug (#11) for all New Generation waterers.