Farm Equipment Livestock Waterers For Sale In Clarksville

The most durable floating tank de-icer available with 1250 Watts. Features heavy duty anti-chew protector. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. Constructed of Cast Aluminum for ultimate efficiency & safety.

The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit. 22" W x 27" L x 26" H 7 gal. Engineered with the farmer in mind, this waterer allows easy access to submersible heater, water line, incoming services and provides...

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. All edges have been rounded for safety & strength.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary. Constructed of Cast Aluminum for ultimate effiency & safety.

Johnson Waterer Element Clips to hold the heating element.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

An Earth Tube is suggested with installation. The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged & commonly available at farm supply stores.

Thermostatically controlled to only run when necessary. Unit measures 7" in diameter, 110v, 1000 Watts. SAFE IN PLASTIC. Designed to fit into narrow opening in any hog waterer resevoir.

You should use silicon caulk to assure an airtight fit. The heat tube is designed to mate with the cavity under the drinker base. Both the water line & the electrical supply can enter from below.

Spring loaded pin allows access panel to pop off with the twist of a screwdriver. Our drinker has foam filled double wall construction which adds to the efficiency. The Pride of the Farm "King" Energy Efficient drinker is beefy & ruggedly built but simple.

SPI 2 1/2" Brass Short Float Stem only.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

The orange male fitting end of the Franklin Valve. No inside working parts included.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation. All edges have been rounded for safety and strength.

Livestock can drink out of both flaps at the same time, not always so with a ball closure. 2-2" drain holes for fast clean out. No pulleys & cable to foul & rust. Weather strip & an insulated sleeve for the supply line come with each unit.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Livestock can drink out of both flaps at the same time, not always so with a ball closure. 2-2" drain holes for fast clean out. No pulleys & cable to foul & rust. Weather strip & an insulated sleeve for the supply line come with each unit.

White styrofoam triangular disc float only.

Heating element ONLY for the Johnson Concrete Model J360.

White polyethylene disc float only.

Simplicity -- few parts; 2. The VP2 uses the same Base, Assembly Nut and O-Ring of the old VP1 making conversion easy. No diaphragm, cam link and power link which are three fewer maintenance items.

Large 2 External AND Internal (5.1 cm) clean out drains. Simple water level adjustment, easy to clean. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad.