Drip Irrigation Tubing Irrigation Tubing For Sale In Hialeah

17 in

• ✓ Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness
• ✓ Dimensions = .710 OD x .620 ID

• Inner Diameter (in.): .62
• Assembled Width (in.): 17 in
• Color Family: Blacks
• Assembled Depth (in.): 17 in

• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens
• ✓ Ideal for slow, deep root watering

7.000 in

• Irrigation System Component: Tubing
• Pressure Rating: 25 psi
• Assembled Depth (in.): 7.000 in
• Assembled Width (in.): 7.000 in

• ✓ For low volume, subsurface applications
• ✓ Copper shield technology that naturally protects from root intrusion
• ✓ Combine up to five 50 ft. coils to extend your watering coverage up to 250 ft.
• ✓ Total satisfaction policy

• Inner Diameter (in.): .60
• Irrigation System Component: Tubing

• ✓ Coiled
• ✓ Manufacturer Warranty
• ✓ Black
• ✓ Operating pressure: 80 psi

• Color Family: Blacks
• Pressure Rating: 80

• ✓ Pressure compensating PC dripline's drip emitters deliver equal flow over the length of the dripline
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Total of 500 1 GPH PC drip emitters per 500 ft. of dripline

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): 0.50
• Irrigation System Component: Tubing

• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ 1/2 GPH flow rate from each emitter

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Tubing Length (ft.): 100

• Returnable: 90-Day
• Irrigation System Component: Tubing
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Tubing Length (ft.): 250
• Assembled Height (in.): 14.6 in
• Assembled Width (in.): 10.4 in

• ✓ For cold water use only
• ✓ Easy to cut

• Assembled Depth (in.): 3.000 in
• Assembled Width (in.): 5.750 in
• Pressure Rating: 25 psi
• Returnable: 90-Day

• ✓ Can be installed above or below ground
• ✓ Bending radius: 1.5 ft.
• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 228 GPH (3.8 GPM)

• Tubing Length (ft.): 100
• Assembled Width (in.): 21 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ For irrigation applications only
• ✓ Easy to install

• Color Family: Blacks
• Irrigation System Component: Pipe
• Assembled Depth (in.): 24.0 in
• Assembled Width (in.): 0.875 in

• Returnable: 90-Day
• Assembled Depth (in.): 7 in
• Color Family: Blacks
• Manufacturer Warranty: 3 Years
• Drip Line/Tubing Type: Porous Tubing
• Assembled Width (in.): .7 in

• ✓ Rated to 120 psi
• ✓ Allows for proper placement and depth of sprinklers without needing to cut or glue PVC risers

• Irrigation System Component: Tubing
• Assembled Depth (in.): 17 in
• Tubing Length (ft.): 100
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• Irrigation System Component: Tubing
• Great for installing or relocating sprinklers in hard-to-reach areas: Yes
• Inner Diameter (in.): .495
• Assembled Depth (in.): 10.75 in
• Tubing Length (ft.): .67
• Pressure Rating: 120 psi

• ✓ Can be covered with mulch and used below or above the ground
• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ Dripper adjusts to water pressure for a constant rate of flow

• Tubing Length (ft.): 100
• Assembled Depth (in.): 18 in
• Manufacturer Warranty: 3 Year Warranty

• ✓ Dimensions = 0.250 O.D. x 0.170 I.D.
• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution

• Outer Diameter (in.): .250
• Irrigation System Component: Pipe
• Tubing Length (ft.): 100
• Pressure Rating: 167 psi max

• Actual outside diameter (in.): 1.00
• Non-toxic FDA grade compound: Yes
• Material: Vinyl
• Product Length (ft.): 50
• Actual inside diameter (in.): .750
• Pipe or Fitting Product Type: Pipe & Tubing

• ✓ Use as flexible drain line
• ✓ For use with hose barbs and clamps

• Maximum working pressure (psi): 50
• Application: Sewer & Drain,Water Supply
• Features: Flexible,Lead Free
• Product Length (ft.): 10

25

• ✓ Non-toxic FDA grade compound
• ✓ Temperature range +25°F to +150°F

• Minimum working temperature (F): 25
• Product Length (ft.): 10
• Maximum working pressure (psi): 25
• Features: Flexible,Lead Free

• ✓ Temperature range +25°F to +150°F
• ✓ Non-toxic FDA grade compound

• Product Weight (lb.): 15.8lb
• Product Depth (in.): 5
• Pipe or Fitting Product Type: Pipe & Tubing
• Pipe & Tubing Product Type: Specialty

• Irrigation System Component: Pipe
• Assembled Depth (in.): 24 in
• Assembled Width (in.): 1.125 in
• Glues to standard PVC fittings for easy installation: Yes
• Tubing Length (ft.): 2
• Color Family: Blacks

• Maximum working pressure (psi): 45
• Pipe or Fitting Product Type: Pipe & Tubing
• Returnable: 90-Day
• Product Width (in.): .500
• Maximum Working Temperature (F): 150
• For use with hose barbs and clamps: Yes

• ✓ Large inner diameter allows installation of long runs of tubing
• ✓ Dimensions = 0.710 O.D. x 0.620 I.D.

18.5 in

• Manufacturer Warranty: 1 YR
• Assembled Width (in.): 18.5 in
• Assembled Depth (in.): 18.5 in
• Assembled Height (in.): 3.5 in

• ✓ Handles a wide variety of chemicals, gases, and liquids
• ✓ Excellent resistance to acids, alkalis, and many solvents

• Product Width (in.): 1.75
• Features: Coiled
• Maximum Working Temperature (F): 125
• Maximum working pressure (psi): 100

• ✓ Limited oil resistance
• ✓ Temperature range -40°F to +160°F

• Product Weight (lb.): 17.4lb
• Pipe Size: 1/8"
• Maximum Working Temperature (F): 160
• Certifications and Listings: No Certifications or Listings

• ✓ Suitable for open end low pressure discharge
• ✓ Black color
• ✓ Temperature range 0°F to +125°F

• Certifications and Listings: No Certifications or Listings
• Pipe or Fitting Product Type: Pipe & Tubing
• Material: Vinyl

• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ Dimensions = .710 O.D. x .620 I.D.
• ✓ 3-layer Matrix technology for improved strength and flexibility

• Pressure Rating: 1 to 60 psi
• Inner Diameter (in.): .62
• Assembled Depth (in.): 12.000 in

• ✓ NSF/IAPMO Compliant
• ✓ Suitable for use with spas, hot tubs and swimming pools

• Certifications and Listings: IAPMO Certified
• Material: PVC
• Features: Flexible,Lead Free
• Application: Sewer & Drain,Water Supply