4 Honda Trash Pump

Heavy-duty 4" construction trash pump Centrifugal self-priming 433 gal/min capacity Easy-starting Honda GX340 OHV commercial-grade engine, Silicon carbide mechanical seal Heavy-duty full frame protection Solid handling up to 1 1/16" Easy to use quick...

Heavy-duty 2" construction trash pump Centrifugal self-priming 187 gal/min capacity Easy-starting Honda GX160 OHV commercial-grade engine, Silicon carbide mechanical seal Heavy-duty full frame protection Solid handling up to 13/16" Easy to use quick clean...

Centrifugal self-priming 2" pump 152 gal/min capacity Easy-starting Honda GX120 OHV commercial-grade engine Silicon carbide mechanical seal Cast iron volute and impeller Heavy-duty full frame protection Isolation mounted engine and pump Protected by Honda...

Centrifugal self-priming 3" pump 275 gal/min capacity Easy-starting Honda GX160 OHV commercial-grade engine, Silicon carbide mechanical seal Cast iron volute and impeller Heavy-duty full frame protection Isolation mounted engine and pump Protected by...

Multi-purpose centrifugal self-priming 2" pump 220 gal/min capacity Easy-starting Honda GX160 OHV commercial-grade engine, Thermoplastic pump housing and EPDM seals for chemical capability Fiberglass reinforced polyester volute and impeller Heavy-duty...

Lightweight centrifugal self-priming 1" pump 72 gal/min capacity Easy-starting Honda GXH50 OHV mini 4-stroke engine, Silicon carbide mechanical seal Aluminum volute and impeller Protected by Honda Oil Alert Includes hose clamps and strainer Tag: gp1,...

Heavy-duty 3" construction trash pump Centrifugal self-priming 319 gal/min capacity Easy-starting Honda GX240 OHV commercial-grade engine, Silicon carbide mechanical seal Heavy-duty full frame protection Solid handling up to 1 1/16" Easy to use quick...

Easy-starting Honda GX25 OHV 4-stroke engine Lightweight centrifugal self-priming 1" pump 37 gallon min. Capacity Aluminum volute and impeller Includes garden hose adaptor, 16.5' suction hose, clamps and strainer Tag: gp1, pump1

Either centrifical pump or a \"mudsucker\" type flapper pump. Gas Powered Trash pump 2 inch inlet and oulet. Gas Powered Trash pump with 2 inch inlet and 2 inch oulet. Needed for pumping mixture of water, leaves and sand from pond.

Out put 264 gpm. 6hp gas, pull start, 2.3 gallons, RPM 3600, cast iron Impellor, Aluminum pump housing, Low oil Protection. PTP Pacific 300 264 gpm trash pump new, still in factory plastic wrap.

Will be used in a quarry for dewatering. Preferably with intake and discharge hoses. Needed in New York State a heavy duty diesel trash pump capacity of 1300 GPM or larger Maximum head 25 feet, maximum lift 60 feet.

Thank you for your consideration. Tornados, fires, landslides and floods. Please help us help those in need. Must be smaller than 6\\" preferably no smaller than 3\\" the more horse power the better.

Gear head optional. Do you have unwanted, used/junk diesel engine, 125 HP, once used for ag well? I will pay for shipping, and give you cash. Call Elizabeth Lee

Please advise if you have this equipment available. Hello, We are looking for a used diesel skid-mounted trash pump, with a capacity of 10\" @ over 2,000 gpm, 25 psi with a suction lift of 20'.

Will pump over 600 gal/min Barnes 4\"Self Priming Centrifigal Trash Pump (trailer mounted) 28 foot Suction Pipe with strainer included 70 foot layflat discharge hose included.

Thompson Pump is respected worldwide for its sophisticated heavy-duty lines of high-quality portable pumps, ranging in size from 2”-18”, for use in varied applications in the areas of public works, municipalities, construction, agriculture, dewatering,...

New - Titan Industrial Model PT-300 3x3 Industrial Trash Pump; 300GPM; 18,000 gal/hr. 12FT lift, 25FT Head; 3x3 inch Semi-Solid material handling; 5.5HP Honda/\"Titan\" gasoline engine; easy recoil start; heavy-duty polyethylene strainer.

Pump was used for temporary dewatering of large detention pond. 6\"x 8\" skid mounted trash pump, 4-71 Detroit w/ Mission pumpbody. Engine is in serviceble condition but uses some oil.

2" trash pump, 187 GPM .

3"x4" centrifugal pump with 20' suction hose, 40' discharge hose, & foot valve. Appears to be in good condition.

Side mounted Lima MAC 15KVA Generator. 2 other pumps available. Asking $11,000. Used to run a Valley 1/4 section pivot. All on cart and covered. No longer required as operating off a pressurized pipeline.

Looking to get $3900.00 plus shipping for the pump and flywheel coupler. Bought new in 2012 and never used. 1 B6EXQBM centrifugal pump and flywheel coupler. Also have the B85410 Flywheel Coupler 11-1/2" clutch 13-7/8" OD 1-1/2" -10T

Pulsator is fully rebuilt from top to bottom. VACUUM PUMP INFO: Features a newly rebuilt farm duty "MADE IN THE USA" Dairyland Porta-Vac vacuum pump, selected and configured to match bucket and your milking requirements.

Can also be used to drive other hydraulic equipment, 4473 hours, strong running diesel. 2004 Case 4391TA Hydraulic Power System designed for driving a water pump head. Well maintained ex-utility company equipment.

Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Delivery available Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Hours 687 Pyro Alarm and Auto Shut Down Rockford PTO unit...

HONDA PIONEER 700-4 UTV, BENCH SEAT, ALLOY WHEELS

Stock # 252468, 1 – used Remlinger trash reel for JD 893 cornhead, they sold for new for $1895 plus hoses, Fence Attachment For: Header-Corn; Make: John Deere; Attachment: CORN REEL; Model: 893