Woodworking Machinery Machinery For Sale In Torrente Valencia

3 Motorized conveyor roller, with selector switch (The guillotine operator places the veneer pack and indicates what splicing machine must receive it) - Pos. 7 Automatic feeding system for both splicing machines with veneer packs accumulator, with motorized...

Composed by: -PEELING LATHE 1600MM Working length 1600mm Working diameter 800mm Final log diameter once processed 70mm Working thickness from 0,5mm to 5mm Double telescopic spindle - OUTFEED CONVEYOR BELT - WINDING SYSTEM FOR THIN VENEER THICKNESS PRODUCTION...

- Unloading and stacking conveyor belt. Composed by: - In feeding conveyor belt measures 4,200x2,400mm - Hydraulic continuous hot press, platens measures 3,400x2,150 x 80mm, 12 cylinders 140mm diameter each.

Veneer Strip Thickness (depending on veneer condition)：approx. 350 mm Veneer Strip Width：min. 45 mm Production Speed：approx. (depending on veneer strip thickness) Equipped with GLUIING UNIT and COOLING UNIT EC standards

Working width 4000mm 2 Floors 4 Drying sections 1 Cooling section

Upper board sanding machine 3 Heads Working width 1300mm New conveyor dragging EC standards

1 lifting table with pit for collection of cut folios. Width Year 2006 Electric cabinet and control desk. 1 TOCCHIO electronic rotary guillotine of 2100 mm.

Regulating Electro-magnetic cylinders on the beam controlled by CNC. 4th) Brush unit Type of brush: Anderlon Dia.: 150 mm Power: 4 kW Feeding motor power: 13 kW HEESEMANN model KSA 8-U: Bottom Sanding and finishing machine 1st wide belt: Longitudinal...

Thermojet - Novapress 6 Drying and ironing sections 1 Cooling and ironing section Working width 4200mm Screen drive system (Belt dragging without sprockets) Construction year 2002 Documentation EC standards

Model TI-600 M Working width 600mm Safety double push-button Safety photocell Safety rear jail EC standards Construction year 2001

Maximum working diameter 750mm (Automatic feeding) or 850mm (Manual feeding) End log diameter once peeled 95mm 2 Telescopic spindle Automatic thickness setting device Totally overhauled 3 months guarantee

Composed by: - Lift table - Board pusher - Gluing machine - Disc conveyor - Board preparation table and prepared table press in feeding - Solid plates hot press, platens measures 8,000x2,000mm, possibility to disable the last row of cylinders to produce...

Moulds press with high frequency generator Available also the moulds for sale From a public buildings equipment factory closed With emergency stop, mechanically and electrically overhauled

Semipress dryer 5 Sections Working width 4000mm Inox wire mesh belt in good condition

Length 1 Hydraulic lift table with wheels Allow the Operator to see the rear side of the machine to can control the cutting and gluing process 1 Driven conveyor roller for PULCHRA machine veneer packs out feeding 1 Fanning machine Monguzzi 1 Driven conveyor...

CPL/PVC/PAPER Working width 1.400mm Laminate with sheet or roll Year 2011 EC standards Good condition Composed by: - In feeding conveyor roller - Brush table - Top side glue spreader machine for Hotmelt (PUR/EVA/POLIOLEFINA) - Sandwich preparation table...

Working length 1800mm Working thickness 1 up to 3,5mm Maximum working diameter 750mm (Automatic feeding) or 850mm (Manual feeding) End log diameter once peeled 95mm Totally overhauled 3 months guarantee

Maximum log dimensions 800x800x4,000mm Maximum log weight 3,000Kg. Maximum working length 4,200mm Knife length 4,450mm Working thickness: 0.2mm (min) – 3.2mm (max) Cuts/strokes per minute 15 (min) – 90 (max)

SCARFING SAW Maximum length of veneer sheet 2700mm Minimum length of veneer sheet 1100mm Veneer thickness range 1,2mm up to 3,5mm Working speed 0,75m/sec JOINTING PRESS Maximum width of veneer 1650mm Minimum width of veneer 1100mm Pressing time 3-8 seconds

Roller conveyor Board in feeding device to preparation table Preparation table (The melamine paper is placed and the board is placed by driven troley) Press in feeding trolley MARZOLA Short cycle lamination hot press -Platens measures 2600x1400mm (For...

CREMONA 5200mm cutting length clipper machine. CREMONA cross cut clipper machine - Tables for veneer bundles handling Composed by: - 2 pcs.

Composed by: 1700mm peeling lathe equipped with debarker system Veneer conveyor belt Rotary guillotine Stacker

Composed of: - Driven conveyor roller for in feeding and board alignment - Longitudinal trimming unit - Board 90º turn device - Transversal trimming unit Veneered board trimming complete line, for veneered board overveneer remove, only the veneer not...

Working width 4.000mm 4 Drying sections 1 Cooling section Z screen path High performance Dismantled by experimented technicians, stocked in good conditions and protected.

Maximum cutting length 3600mm Maximum cutting with between knives 520mm Hydraulic EC standards Year 2007 Delivered revised, tested and ready to work Two knives, twin cut.

Model LAS 230 10 holes Platens measures 2300x1300mm With infeed conveyor EC standards Good condition

Working width 1300mm Working height 0 – 100mm 4 rollers Spreading rollers diameter 250mm Dosing rollers diameter 210mm Motor power 1,7KW Working speed 22m/min Worktop height 890mm Voltage 380V – 50Hz Automatic rollers clean up system EC standards