Watering Irrigation Sprinkler Valves For Sale In Kentucky

• Maximum Working Temperature (F): 140
• Pressure Rating: 150
• Number of Outlets: 0
• Package Quantity: 1
• Product Length (in.): 10.5
• Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California: Yes

• Outlet Size (in.): 2 or less
• Top access checks for easy repair in tight locations: Yes
• Package Quantity: 1
• Installation: Above Ground
• Operation: Automatic
• Pressure Rating: 175

• ✓ Easy to install at lowest point in piping system
• ✓ Unique two-stage screening process prevents grit from siphoning back into pipes
• ✓ Drains pipes and sprinklers to prevent water from freezing inside an irrigation system

• Material: Plastic
• Maximum Pressure (psi): 100
• Thread Type: Pipe Thread

• Compatible Pipe Material: PVC
• Connection: Female Pipe Thread
• Product Width (in.): 4.19 in
• Maximum Working Temperature (F): 120
• Package Quantity: 1
• Product Weight (lb.): .9 lb

• Number of Outlets: 1
• Product Height (in.): 6.25
• Product Width (in.): 17
• Outlet Size (in.): 2 or less
• Thread Type: FIP
• Compatible Pipe Material: Multi-Purpose

• Product Weight (lb.): 1.2 lb
• Operation: Automatic
• Product Length (in.): 3.25 in
• Maximum Pressure (psi): 120
• Number of Outlets: 2
• Outlet Size (in.): 2 or less

• Product Height (in.): 5.625 in
• Maximum Pressure (psi): 120
• Outlet Size (in.): 2 or less
• Valve Type: In-Line
• Pressure Rating: 125 psi
• Material: Polyethylene

• Package Quantity: 1
• Connection: FIP x FIP
• Material: Brass
• Irrigation System Component: Valve
• Noryl replaceable seats and silicone rubber check discs: Yes
• Product Height (in.): 6.25

• Inlet Size (in.): 1
• Trouble-free screw placement with simple debris removal: Yes
• Product Length (in.): 2.5 in
• Returnable: 90-Day
• Outlet Size (in.): 2 or less
• Irrigation System Component: Valve

• ✓ Use in residential, commercial and irrigation applications
• ✓ Made for installation on potable water lines
• ✓ ASSE listed 1015, IAPMO listed, CSA certified B64.5, AWWA compliant C510, approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California, NSF listed - Standard 61, annex G

• Material: Brass
• Connection: FIP x FIP
• Returnable: 90-Day

• Compatible Pipe Material: PVC
• For irrigation use only: Yes
• Product Length (in.): 5.75
• Number of Outlets: 2
• Package Quantity: 1
• Product Weight (lb.): 0.75 lb

• ✓ Flow-control adjustment helps reduce sprinkler fogging and overspray
• ✓ 3/4 in. fitting size
• ✓ For outdoor use only
• ✓ Works with Orbit and major brands of brass and plastic manual valves (angle and anti-siphon) to create an automatic watering cycle

• Valve Type: In-Line
• Compatible Pipe Material: PVC

• Thread Type: Female Meter
• Connection: FHT x MNPT
• Low lead bronze body construction: Yes
• Package Quantity: 1
• Pressure Rating: 175
• Manufacturer Warranty: All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period on one year from date of purchase.

• ✓ Use to install multi-valve systems (sold separately)
• ✓ Jar-top valves are easy to maintain
• ✓ Works with PVC and poly pipe systems (sold separately)

• Irrigation System Component: Valve
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Manufacturer Warranty: 6 year

• ✓ Captive solenoid plunger and anti-siphon poppet for no lost parts during routine service
• ✓ Compatible with DC solenoids used with battery-operated controllers
• ✓ Rigid diaphragm features leak-proof seal
• ✓ For outdoor, cold water use only

• Product Width (in.): 6.5
• Manufacturer Warranty: 2 years

• ✓ Short lay length
• ✓ Removable pressure vessel is serviceable offline and reusable, resulting in reduced labor costs, the ease of repair and replacement significantly decreases water system downtime by 300 percent, a benefit for both service professional and end user

• Installation: Below Ground
• Inlet Size (in.): 1.25
• Product Weight (lb.): 20 lb
• Thread Type: FIP

1

• Operation: Automatic
• Package Quantity: 1
• Installation: Below Ground
• Inlet Size (in.): 1
• Manufacturer Warranty: 6 Years
• Works with both 3/4-in. and 1-in. systems: Yes

• ✓ Use with many major brand brass and plastic manual valves
• ✓ Bleed screw for manual on/off operation and for testing and flushing of sprinkler system

• Maximum Pressure (psi): 120
• Returnable: 90-Day
• Manufacturer Warranty: 6 years
• Product Length (in.): 3 in

• ✓ Corrosion-resistant spring/plastic plunger
• ✓ Brass valve
• ✓ For below-ground installation

2.25 in

• Product Length (in.): 2.25 in
• Material: Brass
• Product Width (in.): 2.25 in

• ✓ Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing
• ✓ Supports manual or automatic operation with a controller (not included) to turn on and off the water supply (pump or solenoid)

• Operation: Automatic,Manual
• Number of Outlets: 4
• Product Height (in.): 7.5
• Thread Type: none

• ✓ Threaded bonnet jar-top system for fast and easy servicing
• ✓ 4-1/2 in. valve footprint

• Irrigation System Component: Valve
• Installation: Above Ground
• Product Height (in.): 7
• Connection: Female Pipe Thread

• ✓ Captured plunger – allows for the solenoid to be removed without losing the internal plunger
• ✓ 5 year limited warranty
• ✓ Heavy-duty santoprene diaphragm – unique design improves durability of diaphragm

• Manufacturer Warranty: Five Year Limited Warranty
• Product Height (in.): 8
• Inlet Size (in.): 1.5

• 12 in. wide x 17.175 in. long x 6 in. high interior working space: Yes
• Manufacturer Warranty: Dura Plastic Products, Inc. ("Sellers") warrants to the original Buyer only, that all products shall be free from defects in design and manufacture for a period of one year from the date of delivery, provided that such products are installed, used and/or adjusted only in strict accordance with the appropriate guidelines.
• Features: Removable Lid
• Product Height (in.): 6.75
• Color/Finish: Tan
• Material: HDPE (High Density Polyethylene)

• ✓ Use with standard 24-volt sprinkler systems (sold separately)
• ✓ Flow control adjustment reduces sprinkler fogging and overspray
• ✓ Prevents contaminants from entering your household water supply
• ✓ Durable plastic construction is UV and corrosion resistant

• Outlet Size (in.): 2 or less
• Pressure Rating: 120 PSI

• ✓ Removable pressure vessel is serviceable offline and reusable, resulting in reduced labor costs, the ease of repair and replacement significantly decreases water system downtime by 300 percent, a benefit for both service professional and end user
• ✓ Easy to winterize by removing pressure vessel between shutoff valves

• Product Weight (lb.): 6 lb
• Thread Type: FIP
• Product Length (in.): 4.12
• Outlet Size (in.): 2 or less

• Thread Type: Female
• Maximum Pressure (psi): 150
• External bleed to flush out dirt from the supply and lateral lines during new installations or repairs: Yes
• Compatible Pipe Material: PVC
• Operation: Automatic
• Valve Type: In-Line

• ✓ Ideal for sprinkler valves or drip manifolds
• ✓ Limited Lifetime Warranty
• ✓ Cover - Over lapping lip dimensions are 14 7/8 in. x 21 1/2in.
• ✓ UV inhibitors help prevent cracking, blistering, discoloration and deterioration

• Cover Shape: Rectangle
• Color Family: Black