Watering Irrigation Irrigation Tubing For Sale In United States

1/4 in. x 500 ft. Poly Micro Drip Tubing

★★★★★

Prices start at : 19.97 USD / each

The micro tubing is used in a wide range of drip irrigation layouts, including being used as feeder lines from the 1/2 in. The micro tubing is manufactured with an antioxidant and contains 2% concentrated Carbon Black to protect the finished product from...

✓ Easily installed
✓ Available in length of 50', 100', and 500 foot coils

11 in

Color Family: Blacks
Assembled Height (in.): 11 in
Inner Diameter (in.): 0.25
Assembled Width (in.): 11 in

United States

1/4 in. x 100 ft. Distribution Tubing

★★★★★

Prices start at : 5.47 USD / each

O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. Connect with Rain Bird 1/4 in. 100 foot coil that can be cut to needed lengths to water plants.

✓ 25 to 30 psi recommended operating pressure
✓ 100 ft. coil
✓ Great for drip and micro irrigation

Outer Diameter (in.): .255
Color Family: Blacks
Returnable: 90-Day

United States

1/2 in. x 100 ft. Distribution Tubing for Drip Irrigation

★★★★★

Prices start at : 11.98 USD / each

Barbed or compression fittings. To place watering devices near plants, add 1/4 in. Barbed couplings. Tubing runs by tapping into the side of this 1/2 in. Kink resistant materials help provide dependable water flow.

✓ 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.
✓ To water plants, add 1/4 in. tubing barbed couplings or drippers

Drip Line/Tubing Type: Drip or Emitter Line Tubing
Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
Assembled Depth (in.): 20.3 in
Irrigation System Component: Tubing

United States

1/2 in. (0.710 O.D.) x 100 ft. Poly Drip Irrigation Tubing

★★★★★

Prices start at : 10.97 USD / each

Made with premium quality polyethylene resins, DIGs 0.710 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations.

✓ Dimensions: 100 ft. with 0.620 ID x 0.710 OD
✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
✓ Bending radius: 1.5 ft.
✓ Maximum operating pressure: 60 psi

Color Family: Blacks
Assembled Depth (in.): 21 in

United States

1/4 in. x 50 ft. Porous Soaker Tubing

★★★★★

Prices start at : 6.35 USD / each

The Orbit Soaker Tubing is easy to install and is ideal for watering flowerbeds, closely planted areas, potted plants and vegetable gardens. Durable and UV resistant construction provide years of reliable use.

✓ Black in color
✓ For drip irrigation applications only

Assembled Height (in.): 9 in
Manufacturer Warranty: None
Pressure Rating: 25 psi
Irrigation System Component: Tubing

United States

1/8 in. x 50 ft. Vinyl Micro Drip Tubing

★★★★★

Prices start at : 4.16 USD / each

Vinyl micro tubing is used with the DIG Maverick 12-outlet pressure compensating drip manifold. Attach the tubing to the drip manifold then run lengths to your individual plants up to 10 ft.

✓ 50 ft. L
✓ Made from UV resistant materials for a long life in the landscape

Color Family: Blacks
Manufacturer Warranty: 3 Year Warranty
Pressure Rating: 35 psi
Assembled Width (in.): 5 in

United States

1/4 in. x 50 ft. Poly Micro Drip Tubing

★★★★★

Prices start at : 4.27 USD / each

Vinyl Micro-tube is designed not to kink or crimp. The DIG Corp 1/4 in. The durable tubing is UV resistant and can be laid either above or below ground. It can be used either for extending drippers and micro-sprinklers from a main line or as the basis...

✓ Use as the basis for a complete patio system
✓ May be laid above or below ground
✓ Low density polyethylene construction

Inner Diameter (in.): 0.25
Assembled Height (in.): 2.5 in
Assembled Width (in.): 6 in

United States

1/4 in. x 50 ft. Soaker Hose Dripline

★★★★★

Prices start at : 7.97 USD / each

Drip line has cylinder, labyrinth emitters inserted inside the tubing every 12 in. DIG's SH50 drip line is an extremely versatile drip irrigation method that will save you time, water and money.

✓ Saves water by delivering water right where it is needed most, at the plant root zone
✓ No special tools or glues necessary for installation
✓ Reduces weed growth

Returnable: 90-Day
Assembled Depth (in.): 7 in
Pressure Rating: 60 psi

United States

1/4 in. x 100 ft. Dripline with 9 in. Emitter Spacing

★★★★★

Prices start at : 21.96 USD / each

Drip line has cylinder, labyrinth drip emitters inserted into the micro tubing every 9 in. For complete saturation of the area along the drip line. Ideal for vegetable gardens, containers, boxes, row plantings and can even be looped around trees.

✓ 100 ft. L
✓ Designed for easy installation with standard tools
✓ 1/2 GPH flow rate from each emitter
✓ Professional design

Color Family: Browns / Tans
Inner Diameter (in.): .25

United States

1/4 in. x 50 ft. Vinyl Micro Drip Tubing

★★★★★

Prices start at : 4.48 USD / each

Extremely versatile and designed for ease of use within a drip irrigation system application. Can be used as the main line in a small system or to branch off 1/2 in. The DIG 1/4 micro tubing is made tough, UV resistant vinyl.

✓ Works with all 1/4 in. barb fittings
✓ Flexible design allows for easy of use

Outer Diameter (in.): .25
Drip Line/Tubing Type: Drip or Emitter Line Tubing
Assembled Depth (in.): 5.5 in
Inner Diameter (in.): 0.25

United States

1/2 in. x 50 ft. Dist Tubing

Prices start at : 11.59 USD / each

Use to distribute water in a drip irrigation system. To be used outdoors with cold water only. This flexible distribution tubing works with most new or existing drip systems.

✓ For drip irrigation applications only
✓ Flexible tubing with UV-resistance

Assembled Height (in.): 19.000 in
Returnable: 90-Day
Outer Diameter (in.): 0.5
Drip Line/Tubing Type: Drip or Emitter Line Tubing

United States

1/4 in. x 100 ft. Blue Stripe Drip Tubing with Emitters

★★★★★

Prices start at : 20.49 USD / each

Tubing with Emitters is a professional-quality drip hose made of high-quality polyethylene. The Toro Blue Stripe Drip 1/4 in. Use it with other Blue Stripe Drip products to create a custom irrigation layout that is specific to your landscape or garden.

Tubing Length (ft.): 100
Drip Line/Tubing Type: Drip or Emitter Line Tubing
Dimensions = 0.250 O.D. x 0.170 I.D.: Yes
Color Family: Blacks
Manufacturer Warranty: 1 year
Inner Diameter (in.): .170

United States

1/4 in. x 50 ft. Porous Drip Soaker Hose

★★★★★

Prices start at : 7.78 USD / each

Use the porous soaker hose with 1/4 in. Use the DIG 1/4 in. Constructed of UV-resistant materials, the porous soaker hose is made of extruded recycled rubber material. Provides a flow rate of approximately 0.4 GPH per ft.

✓ Designed for short runs up to a maximum of 30 feet and with a flow rate of .4 GPH per ft., the 1/4 inch porous soaker hose can be use for watering flowerbeds, potted plants & vegetable gardens
✓ Simple to install Used with 1/4 inch micro tubing and 1/2 inch drip tubing using 1/4 inch barbs fittings
✓ Close the end of the line with a goof plug

Tubing Length (ft.): 50
Pressure Rating: 25 psi
Color Family: Blacks

United States

1/2 in. x 50 ft. Emitter Tubing Coil

★★★★★

Prices start at : 12.04 USD / each

The emitters are designed for clog-resistant flow. Designed for multi-season use, this rugged Rain Bird 1/2 in. With 0.9 GPH (gallons per hour) built-in emitters spaced every 18 in., the tubing waters evenly from beginning to end of its layout in your...

✓ 50 foot coil
✓ 50 ft. coil with built-in pressure compensating emitters spaced every 18 in.
✓ Works like soaker hose - only better
✓ .9 GPH (3.4 LPH) flow per emitter

Tubing Length (ft.): 50
Assembled Height (in.): 20.40 in

United States

DIG 500 ft. 1 GPH Pressure Compensating Dripline with 12 in. Spacing

Prices start at : 150.06 USD / each

With .700 OD dripline is extruded with 1 GPH pressure compensating (PC) drip emitters built into the interior wall of the dripline every 12 in. For commercial and residential applications, install this drip line above the ground and, if desired, cover...

✓ Can be covered with mulch and may used below or above the ground
✓ Total of 500 1 GPH PC drip emitters per 500 ft. of dripline
✓ Pressure compensating PC dripline's drip emitters deliver equal flow over the length of the dripline
✓ Total flow per 100 ft.: 100 GPH (1.66 GPM)

Manufacturer Warranty: 3 years
Tubing Length (ft.): 500

United States

1/2 in. (0.700 O.D.) x 100 ft. Poly Drip Tubing

★★★★★

Prices start at : 10.35 USD / each

Made with premium quality polyethylene resins, DIG's 0.700 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations.

✓ Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground
✓ Ideal for use in landscape installations and home gardens
✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
✓ Dimensions: 100 ft. with .600 ID x .700 OD

Manufacturer Warranty: 3 Year Warranty

United States

1/4 in. x 50 ft. Drip-A-Long Drip Soaker

★★★★★

Prices start at : 10.64 USD / each

Intervals to combine the reliability of drip watering with the convenience of a soaker hose. Drip-A-Long Drip Soaker has drippers spaced at 12 in. It is ideal for watering planters and small plants in rows and borders.

✓ Combines the reliability of drip watering with the convenience of a soaker hose
✓ Made in USA

Inner Diameter (in.): 0.25
Returnable: 90-Day
Pressure Rating: 25
Color Family: Blacks

United States

1/2 in. x 500 ft. Distribution Tubing

★★★★★

Prices start at : 44.6 USD / each

Use to distribute water to drippers, misters, and low volume sprinklers. Durable construction provides years of reliable use. This flexible Distribution Drip tubing works with most new or existing drip systems.

✓ For cold water use only
✓ Easy to install
✓ Black in color

Color Family: Blacks
Pressure Rating: 120 psi
Assembled Depth (in.): 24 in

United States

DIG-112PC-12 in. x 100 ft. 1-GPH Pressure Compensating Drip Line with 0.700 in. O.D.

Prices start at : 31.93 USD / each

I.D. x 0.700 in. DIG's PC Drip Line ( color black) consists of 100 ft. Each PC drip emitter consists of a cylindrical labyrinth water passage, filter and silicon diaphragm. Black PC Drip Line is used above the ground and can be covered with mulch.

✓ Used for commercial and residential applications
✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems

Assembled Depth (in.): 19.5 in
Inner Diameter (in.): 0.50
Tubing Length (ft.): 100
Manufacturer Warranty: 3 years

United States

Blue Stripe 1/2 in. x 100 ft. Drip Hose

★★★★★

Prices start at : 29.97 USD / each

Drip Hose is the quick-and-easy way to uniformly irrigate your garden or flower bed. The Toro Blue Stripe Drip 1/2 in. This professional-quality drip hose has been consistently tested in agricultural and greenhouse applications and produced great results.

✓ Dimensions = 0.710 O.D. x 0.620 I.D.
✓ UV resistant
✓ 1-gallon per hour emitters installed every 18 in.

Drip Line/Tubing Type: Drip or Emitter Line Tubing
Outer Diameter (in.): .71
Irrigation System Component: Tubing

United States

1/4 in. x 60 ft. Drill Soaker Tube

★★★★★

Prices start at : 7.36 USD / each

The tubing has drilled pores every 6 in. Drill Soaker Tubing is easy to install. To provide slow flow for deep root watering. Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens.

✓ 60 ft. in length
✓ Ideal for slow, deep root watering
✓ Easy to install
✓ Durable construction provides many years of reliable use

Outer Diameter (in.): 0.25
Assembled Width (in.): 7.000 in

United States

1/4 in. x 50 ft. Brown Distribution Tubing

Prices start at : 4.65 USD / each

Use to distribute water to drippers, misters, and low volume sprinklers. To be used outdoors with cold water only. Compatible with all drip irrigation systems.

✓ For drip irrigation applications
✓ Easy to cut tubing
✓ Easy to attach drip fittings

Irrigation System Component: Tubing
Manufacturer Warranty: None
Inner Diameter (in.): 0.25

United States

1/4 in. x 250 ft. Tubing

★★★★★

Prices start at : 14.98 USD / each

Tubing is for use with spot watering emitters. Long tubing can also be used to run water to emitter tubing and to individual plants. Length for large installations.

✓ Compatible with most brands of 1/4 in. Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
✓ For use with spot watering emitters
✓ Connect with Rain Bird 1/4 in. barbed fittings and stakes

Assembled Height (in.): 14.6 in
Inner Diameter (in.): .165
Pressure Rating: 70 psi

United States

1/4 in. x 500 ft. Emitter Tubing with 12 in. Spacing

★★★★★

Prices start at : 67.12 USD / each

Extremely versatile and flexible, DIG's 1/4 in. The drip line can also be used in planter boxes, vegetable gardens, window boxes, raised beds, or coiled around individual plants or trees.

✓ Allows water to drip directly to the root zone, delivering a beneficial deep watering
✓ Contains UV inhibitors for long life and extended operation in harsh conditions

Outer Diameter (in.): 0.25
Tubing Length (ft.): 500
Drip Line/Tubing Type: Drip or Emitter Line Tubing
Assembled Width (in.): 14.5 in

United States

Blue Stripe 1/4 in. x 100 ft. Tubing

★★★★★

Prices start at : 6.97 USD / each

Tubing, made from polyethylene materials for flexibility. For a professional drip irrigation option, choose the Toro Blue Stripe 1/4 in. The non-vinyl construction is also free from harmful chemicals that could damage plants.

✓ High-quality polyethylene material
✓ Designed for use with other Toro Blue Stripe Drip products
✓ Dimensions = .250 OD x .170 ID

Outer Diameter (in.): .25
Inner Diameter (in.): .17
Assembled Width (in.): 10.5 in

United States

Blue Stripe 1/2 in. x 500 ft. Drip Tubing

★★★★★

Prices start at : 69.34 USD / each

Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular, flexible inner core. The Toro Blue Stripe 1/2 in.

✓ Large inner diameter allows installation of long runs of tubing
✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration
✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins

Tubing Length (ft.): 500
Assembled Width (in.): 42 in
Inner Diameter (in.): .62

United States

1/4 in. x 100 ft. Dripline with 9 in. Spacing and 0.5 GPH

★★★★★

Prices start at : 14.87 USD / each

Manufacturer Warranty: 3 year warranty
Drip Line/Tubing Type: Porous Tubing
Color Family: Blacks
Assembled Width (in.): 9 in
No special tools or glues necessary for installation: Yes
Tubing Length (ft.): 100

United States