Watering Irrigation Irrigation Tubing For Sale In St Louis

• ✓ For low volume, subsurface applications
• ✓ Intended for underground installation
• ✓ Copper shield technology naturally protects from root intrusion
• ✓ Flow rates: 0.9 GPH every 18 in. (emitter spacing)

• Returnable: 90-Day
• Irrigation System Component: Tubing

• ✓ Flexible pipe means fewer fittings required and joints to glue in piping systems
• ✓ Great for repairs
• ✓ Do not insert fingers

• Inner Diameter (in.): 0.5
• Assembled Height (in.): 0.875 in
• Returnable: 90-Day

• ✓ For short runs up to a maximum length of 30 ft.
• ✓ 50 foot roll
• ✓ Suggested operating pressure: 25 PSI

• Assembled Width (in.): 7.5 in
• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day

• ✓ Filter requirement: minimum of 150 mesh
• ✓ Two (2) outlets per each drip emitter
• ✓ 9 in. pre-inserted emitter spacing

• Manufacturer Warranty: 3 year warranty
• Color Family: Blacks
• Irrigation System Component: Tubing

• ✓ Black color
• ✓ Great for drip and micro irrigation
• ✓ For use in drip irrigation system installation, expansion, or repair
• ✓ 25 to 30 psi recommended operating pressure

• Pressure Rating: 70 psi
• Assembled Width (in.): 8 in

• Returnable: 90-Day
• Assembled Depth (in.): 24 in
• Tubing Length (ft.): 2
• Inner Diameter (in.): .5
• Assembled Height (in.): 2 in
• Irrigation System Component: Tubing

• ✓ 50 ft. L
• ✓ Made from durable materials for long life in the landscape

• Color Family: Blacks
• Tubing Length (ft.): 50
• Outer Diameter (in.): .25
• Irrigation System Component: Tubing

• Assembled Width (in.): 7.25 in
• A single 1/4 in. soaker line should not exceed 15 ft.: Yes
• Pressure Rating: 25 psi
• Color Family: Blacks
• Outer Diameter (in.): 0.25
• Manufacturer Warranty: None

0.25

• Inner Diameter (in.): 0.25
• Pressure Rating: 25
• Assembled Depth (in.): 3 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Height (in.): 6 in
• Outer Diameter (in.): 0.25

• ✓ Large labyrinth water passage and filter intake area in each dripper are continuously flushed by the water flow to reduce clogging
• ✓ Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Tubing Length (ft.): 100
• Inner Diameter (in.): 0.50

• ✓ Compatible with most brands of 1/4 in. Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
• ✓ Run water to individual plants
• ✓ Total Satisfaction Policy
• ✓ Can be used to run water to emitter tubing

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ Dripper adjusts to water pressure for a constant rate of flow

• Returnable: 90-Day
• Outer Diameter (in.): .50
• Irrigation System Component: Tubing
• Assembled Height (in.): 4.75 in

• ✓ Suitable for planter boxes, window boxes, closely planted or narrow areas, vegetable gardens, or looped around roses, shrubs, trees, for gravity feed systems and for green roofs and walls
• ✓ Contains UV inhibitors for long life and extended operation in harsh conditions

• Assembled Height (in.): 7.75 in
• Color Family: Blacks
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): 0.25

• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
• ✓ Used with DIG's 0.700 OD compression, Universal and nut lock drip fittings
• ✓ Designed for placement in both new and existing landscape areas including green-roof areas
• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow at a wide range of operating pressures and over a long length of drip line
• ✓ Operating pressure range: 10 to 45 PSI
• ✓ Ideal for installation on difficult terrain such as on slopes, in oddly shaped areas and on windy sites

• ✓ Designed to work with Toro Blue Stripe drip-irrigation products
• ✓ Dimensions = .710 OD x .620 ID

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Inner Diameter (in.): .62
• Color Family: Blacks

• Durable construction provides many years of reliable use: Yes
• Irrigation System Component: Tubing
• Assembled Height (in.): 9.000 in
• Assembled Depth (in.): 7.000 in
• Outer Diameter (in.): 0.25
• Manufacturer Warranty: None

• ✓ For outdoor use only
• ✓ 1/4 Inch wide
• ✓ Easy to cut

• Assembled Height (in.): 8.250 in
• Pressure Rating: 25 psi
• Assembled Width (in.): 5.750 in

• ✓ Use as flexible drain line
• ✓ Suitable for use with liquids, chemicals and gases

• Product Weight (lb.): .55lb
• Maximum working pressure (psi): 45
• Product Length (ft.): 10
• Material: Vinyl

• Returnable: 90-Day
• Fitting Type: Barb Fittings
• Material: Plastic
• Product Height (in.): 6
• Works with all brands of 1/4 in. drip tubing: Yes
• Outer Diameter (in.): 0.25

• ✓ Use with DIG Maverick 12-outlet drip manifolds (Models PC1202, PC1204, PC12100 and PC14100)
• ✓ Flexible design allows for ease of use
• ✓ 50 ft. L

• Outer Diameter (in.): .125
• Color Family: Blacks
• Returnable: 90-Day

• ✓ For use with 1/4 in. distribution or soaker tubing
• ✓ Easy to install
• ✓ Double barb design adds additional holding power

• Returnable: 90-Day
• Pressure Rating: 80
• Fitting Type: Barb Fittings

• ✓ Available in length of 50', 100', and 500 foot coils
• ✓ Easily installed
• ✓ Flexible design allows for easy of use

• Tubing Length (ft.): 500
• Color Family: Blacks
• Assembled Height (in.): 11 in

• ✓ Encapsulated by heavy-duty plastic
• ✓ Captive plunger offers easy servicing of solenoid
• ✓ Protects electronics area from water intrusion

• Returnable: 90-Day
• Irrigation System Component: Accessory
• Package Quantity: 1

• ✓ Install Toro matched precipitation rate (MPR) nozzles to ensures even water distribution, any pattern and any radius to prevent over or under watered areas
• ✓ Radius reduction screw reduces spray radius up to 25% so you can customize each sprinkler according to landscape needs
• ✓ Ideal for small lawn and shrub areas
• ✓ Coverage area of up to 15 sq. ft.

• Returnable: 90-Day
• Package Quantity: 1

• ✓ Color coded for easy identification during installation and maintenance
• ✓ Adjustable 15 ft. male thread spray nozzle

• Manufacturer Warranty: None
• Returnable: 90-Day
• Irrigation System Component: Nozzle

• ✓ Convert Orbit automatic sprinkler valves to with the Orbit Battery Operated Sprinkler Timer (Model 57860)
• ✓ For cold water use only
• ✓ Works on Orbit automatic sprinkler valves with a Bleed screw or solenoid mounted On/Off bleed lever
• ✓ For irrigation applications only
• ✓ Provides easy installation

• Returnable: 90-Day

.75

• ✓ Engineered for a leak free experience
• ✓ Designed for use season after season
• ✓ Allows hook-up of Drip irrigation tubing and garden hoses to the same faucet bib

• Inner Diameter (in.): .75
• Outer Diameter (in.): .75
• Material: Polymer