Watering Irrigation Irrigation Tubing For Sale In Spokane

Sprinkler Flex Assembly features an 8 in. The Toro Funny Pipe 3/4 in. Helps makes sprinkler installation quick and easy with no cutting, glue or clamps required. Funny Pipe with Funny Pipe fittings.

Emitter tubing with 12 in. Extremely versatile and flexible, DIG's 1/4 in. The micro drip line can be installed in a wide range of above ground application layouts, or used under mulch or bark to conserve water or for aesthetic reasons.

O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. 100 foot coil that can be cut to needed lengths to water plants.

Tubing runs by tapping into the side of this 1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Drip Tubing with Rain Bird 1/2 in.

The micro tubing is used in a wide range of drip irrigation layouts, including being used as feeder lines from the 1/2 in. This commercial grade polyethylene micro tubing (Distribution tubing) is made of high quality linear low-density polyethylene resin.

Tubing is for use with spot watering emitters. Length for large installations. Long tubing can also be used to run water to emitter tubing and to individual plants.

The non-vinyl construction is also free from harmful chemicals that could damage plants. Tubing, made from polyethylene materials for flexibility. For a professional drip irrigation option, choose the Toro Blue Stripe 1/4 in.

The Toro Blue Stripe 1/2 in. It is UV resistant and has been consistently tested in agriculture and greenhouse applications. Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular,...

Each PC drip emitter consists of a cylindrical labyrinth water passage, filter and silicon diaphragm. Of inch (0.600 in. I.D. x 0.700 in. O.D.) drip tubing with 100, 1-GPH pressure compensating (PC) drip emitters inserted into the interior wall of the...

DIG Corp's 1/4 in. The durable micro tubing is manufactured of high quality, professional grade materials and can be used either above or below ground. Polyethylene micro tubing is used in the installation of drip irrigation system.

A complete range of tubing lengths, fittings and swing assemblies are available to suit installation requirements. The Rain Bird swing pipe system allows positioning underground sprinkler heads around hardscapes, terraces, plantings and uneven terrain.

Includes fittings. Intervals to combine the reliability of drip watering with the convenience of a soaker hose. The raindrip 1/4 in. It is ideal for watering planters and small plants in rows and borders.

Because it leaves no excess water on the leaves as is common with overhead watering methods, there is less chance of leaf fungus and plant wilt. The tubing has 0.9 GPH emitters spaced every 18 in.

The Toro Blue Stripe 1/2 in. It is UV resistant and has been consistently tested in agriculture and greenhouse applications. Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular,...

Since it glues into standard PVC fittings, it is easy to install. Flexible PVC Pipe is great for repairs and serves as routing pipe in hard-to-reach areas. This Orbit 1/2 in.

Ideal for vegetable gardens, containers, boxes, row plantings and can even be looped around trees. Drip line has cylinder, labyrinth drip emitters inserted into the micro tubing every 6 in.

The Toro Blue Stripe 1/2 in. It is UV resistant and has been consistently tested in agriculture and greenhouse applications. Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular,...

Not for use with ice makers or petroleum based products. Excellent resistance to mild acids and chemicals. Manufactured with non-toxic FDA compounds. Clear PVC tubing reinforced with spiral polyester for use in pressure applications.

Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Clear PVC tubing manufactured with non-toxic FDA compounds.

Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Clear PVC tubing manufactured with non-toxic FDA compounds.

The DIG Corp 1/4 in. The durable tubing is UV resistant and can be laid either above or below ground. Vinyl Micro-tube is designed not to kink or crimp. It can be used either for extending drippers and micro-sprinklers from a main line or as the basis...

For a leak proof connection. Comes with smooth end connections manufactured into the hose every 36 in. White Low Density Polyethylene Bilge Hose for marine pump and low pressure discharge applications.

To be used outdoors with cold water only. Use to distribute water in a drip irrigation system. This flexible distribution tubing works with most new or existing drip systems.

Durable construction provides years of reliable use. Use to distribute water to drippers, misters, and low volume sprinklers. This flexible Distribution Drip tubing works with most new or existing drip systems.

Economical and lightweight, used for pneumatic control lines and liquids in industrial applications. Natural non-toxic FDA grade translucent polyethylene tubing. Excellent choice for use with ice makers.

Not for under hood applications. Designed for vacuum applications but can be used for low pressure water lines. Black Non-Reinforced Vacuum Tubing. Small diameter thermoplastic compound for a variety of uses.

A complete range of tubing lengths, fittings and swing assemblies are available to suit installation requirements. The Rain Bird swing pipe system allows positioning underground sprinkler heads around hardscapes, terraces, plantings and uneven terrain.