Watering Irrigation Irrigation Tubing For Sale In Sherbrooke

• ✓ UV-resistant
• ✓ Compatible with all drip irrigation systems
• ✓ Easy to attach drip fittings

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): 0.25
• Assembled Height (in.): 9.250 in

0.25

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Outer Diameter (in.): 0.25
• 12 in. pre-inserted emitter spacing: Yes
• Color Family: Blacks
• Inner Diameter (in.): 0.25

• ✓ Extremely durable for all-weather performance, yet easy to cut with scissors
• ✓ Additional emitters sold separately
• ✓ Easy to use, durable tubing
• ✓ Easy to use, bends without kinks or restricting water flow

• Returnable: 90-Day
• Manufacturer Warranty: No

• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
• ✓ Maximum operating pressure: 60 psi
• ✓ Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Assembled Height (in.): 5 in
• Color Family: Blacks
• Inner Diameter (in.): .50

• ✓ Easy to install
• ✓ Emitters drilled every 6 in. waters 0.9 GPH every foot at 25 psi

• Assembled Height (in.): 9.000 in
• Inner Diameter (in.): 0.25
• Drip Line/Tubing Type: Porous Tubing
• Color Family: Blacks

• ✓ Can be covered with mulch and used below or above ground
• ✓ Operating pressure range: 10 to 45 PSI
• ✓ Ideal for installation on difficult terrain such as on slopes, in oddly shaped areas and on windy sites
• ✓ Used with DIG's 0.700 OD compression, Universal and nut lock drip fittings

• Assembled Depth (in.): 19.5 in
• Manufacturer Warranty: 3 years

• Tubing Length (ft.): 500
• Manufacturer Warranty: 5
• Returnable: 90-Day
• Pressure Rating: 25
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Saves money by significantly lowering the cost of system components compared to conventional irrigation systems products, may be exempt from residential and commercial watering restrictions (check local codes): Yes

• ✓ Use with DIG Maverick 12-outlet drip manifolds (Models PC1202, PC1204, PC12100 and PC14100)
• ✓ 50 ft. L

.125

• Color Family: Blacks
• Inner Diameter (in.): .125
• Returnable: 90-Day
• Outer Diameter (in.): .125

• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 228 GPH (3.8 GPM)
• ✓ Bending radius: 1.5 ft.
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
• ✓ Can be installed above or below ground

• Returnable: 90-Day
• Color Family: Blacks

• ✓ Non-toxic FDA grade compound
• ✓ Temperature range -40°F to +150°F
• ✓ Translucent milky white color

• Application: Sewer & Drain,Water Supply
• Product Width (in.): 9.5
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

• Actual outside diameter (in.): .875
• Pipe or Fitting Product Type: Pipe & Tubing
• Actual inside diameter (in.): .625
• Pipe & Tubing Product Type: Specialty
• Pipe Size: 5/8"
• For use with hose barbs and clamps: Yes

• ✓ Easy to install
• ✓ For outdoor use only

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 2
• Returnable: 90-Day
• Assembled Height (in.): 0.875 in

• Returnable: 90-Day
• Pressure Rating: 60 psi
• Color Family: Blacks
• Outer Diameter (in.): 0.25
• 500 ft. in length: Yes
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Softer, more flexible, and easier to use than poly micro tubing
• ✓ Available in length of 50 ft., 100 ft., and 500 ft. coils
• ✓ Use with 1/4 in. barbed fittings

• Outer Diameter (in.): 0.25
• Assembled Height (in.): 5.5 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Made in North America
• ✓ Suitable for use with liquids, chemicals and gases

• Maximum Working Temperature (F): 150
• Features: Flexible,Lead Free
• Minimum working temperature (F): 25
• Actual inside diameter (in.): .312

• Application: Sewer & Drain,Water Supply
• Actual inside diameter (in.): .625
• Pipe Size: 5/8"
• Maximum Working Temperature (F): 150
• Product Depth (in.): 120
• Minimum working temperature (F): 25

• Product Length (ft.): 33
• Features: Flexible,Lead Free
• Application: Sewer & Drain,Water Supply
• Easily cut to fit application: Yes
• Minimum working temperature (F): -20
• Actual inside diameter (in.): .0625

• ✓ Plastic construction provides durability
• ✓ Provides 5 sq. ft. of coverage
• ✓ Stainless-steel flow-adjustment screw adjusts from full-flow to a light trickle
• ✓ Inlet filter basket helps prevent debris clogs
• ✓ For outdoor use only

• Irrigation System Component: Accessory

• ✓ Easy to assemble and connect to your outdoor faucet
• ✓ Eliminates the need to hand water free-standing planters and patio pots
• ✓ Each kit contains: (1) pressure regulator with 1/4 in. tubing adaptor, (10) 1/4 in. stakes with bug caps, (2) 1/4 in. barbed couplings, (10) tubing mounting clips, (4) spot watering emitters 2 GPH, (4) spot watering emitters 1 GPH, (8) 1/4 in. barbed tees and 25 ft. of 1/4 in. tubing
• ✓ Rain Bird's Patio Plant Watering Kit is an easy and convenient way to water your container plants and keep them looking healthy

• Package Quantity: 40
• Returnable: 90-Day

• ✓ Color and texture is part of the material, not painted on
• ✓ When using our rocks to cover a device, please consult the "Usable Dimensions Table" by clicking the More Views icon above. DekoRRa rocks are irregular in shape and have taper from base to top.
• ✓ Easily conceals and protects most external pump assemblies for irrigation and well applications
• ✓ Constructed of recyclable materials
• ✓ SS or Sandstone color includes tan and brown tones and highlights

• Returnable: 90-Day

• Returnable: 90-Day
• Use as pneumatic control line: Yes
• Features: Flexible,Lead Free
• Pipe Size: 3/8"
• Actual outside diameter (in.): .375
• Material: Low-Density Polyethylene (LDPE)

1.0

• ✓ For outdoor use and cold water only
• ✓ Do not insert fingers
• ✓ For cold water use only

• Outer Diameter (in.): 1.0
• Inner Diameter (in.): 1.0
• Package Quantity: 1

• ✓ Adjustable stainless steel screw reduces the radius by up to 25%
• ✓ Matched precipitation - allows for even water distribution
• ✓ Extra long filters provide longer time between cleanings

• Irrigation System Component: Nozzle
• Package Quantity: 1

• ✓ Matched precipitation rate (MPR) ensures even water distribution
• ✓ 570 MPR+ nozzles are also available in specialty patterns for unlimited design flexibility
• ✓ Pre-installed pressure-compensating device (PCD) conserves water by eliminating fogging and misting
• ✓ 15 ft. spray radius with 1.65 GPM at 30 psi

• Package Quantity: 1
• Irrigation System Component: Nozzle

• ✓ Tapered inside ends allow standard pop-up. heads to slide up and down without restriction.
• ✓ For irrigation applications only
• ✓ Do not insert fingers

• Manufacturer Warranty: None
• Package Quantity: 1
• Returnable: 90-Day

• ✓ For repair applications
• ✓ For use with 24-Volt sprinkler timer (not included)
• ✓ Replacement for all Orbit WaterMaster automatic valve solenoids

• Package Quantity: 1
• Manufacturer Warranty: 1 year
• Returnable: 90-Day

• ✓ For irrigation applications only
• ✓ Grey 0.02 x 0.02 mesh filter screen
• ✓ For outdoor use only

• Package Quantity: 1
• Irrigation System Component: Nozzle
• Returnable: 90-Day