Watering Irrigation Irrigation Tubing For Sale In New Hampshire

• ✓ Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

• Outer Diameter (in.): .50
• Returnable: 90-Day
• Manufacturer Warranty: 3 Year Warranty
• Irrigation System Component: Tubing

• ✓ Black
• ✓ Operating pressure: 80 psi
• ✓ Coiled

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day
• Assembled Width (in.): 2 in

• ✓ Works like soaker hose - only better
• ✓ Built-in 1 GPH emitters spaced 12 in. apart
• ✓ Flexible for easy installation
• ✓ Emitters feature two outlet holes, one on either side of tubing (180° apart)

• Color Family: Blacks
• Drip Line/Tubing Type: Porous Tubing

• ✓ 1/2 gallon per hour turbulent flow drippers spaced at 12 in. intervals
• ✓ 50 ft. drip soaker ideal for watering planters and small plants in rows and borders

• Irrigation System Component: Pipe
• Returnable: 90-Day
• Color Family: Blacks
• Pressure Rating: 25

• ✓ Made from high quality, UV resistant materials
• ✓ 1/2 GPH flow rate from each emitter

• Inner Diameter (in.): 0.25
• Manufacturer Warranty: 3 year warranty
• Returnable: 90-Day
• Tubing Length (ft.): 100

• ✓ 12 in. pre-inserted emitter spacing
• ✓ 100 ft. length

• Tubing Length (ft.): 100
• Pressure Rating: 25 psi
• Assembled Height (in.): 9 in
• Color Family: Blacks

• ✓ For irrigation applications only
• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens

• Assembled Width (in.): 7.000 in
• Tubing Length (ft.): 60
• Manufacturer Warranty: None
• Assembled Height (in.): 9.000 in

• ✓ Extruded in USA
• ✓ Can be covered with mulch and may used below or above the ground
• ✓ Flexible tubing for easy installation; no special tools or glue are needed

• Assembled Height (in.): 6 in
• Assembled Width (in.): 17.5 in
• Inner Diameter (in.): 0.50

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Pressure Rating: 70 psi
• Color Family: Blacks
• Assembled Height (in.): 3.8 in
• Returnable: 90-Day
• 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.: Yes

• ✓ 3/8 in. I.D. flexible tubing
• ✓ 8 in. funny pipe
• ✓ Pre-installed funny pipe fittings

• Inner Diameter (in.): .495
• Returnable: 90-Day
• Manufacturer Warranty: 1 YR

• ✓ Dimensions = 0.710 O.D. x 0.620 I.D.
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ 3-layer Matrix technology for improved strength and flexibility

• Tubing Length (ft.): 50
• Assembled Width (in.): 18.5 in
• Inner Diameter (in.): .62

• ✓ Sized to 0.7 in. outside diameter
• ✓ Works with most new or existing drip systems

0.5

• Outer Diameter (in.): 0.5
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: None
• Inner Diameter (in.): 0.5

• ✓ Superior flexibility allows pipe to be efficiently routed around hardscape, terraces, and uneven terrain to turn landscape design into reality
• ✓ Connects sprinkler heads to lateral pipes

• Color Family: Blacks
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .5
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Allows for proper placement and depth of sprinklers without needing to cut or glue PVC risers
• ✓ Use with Toro funny pipe fittings
• ✓ Note: Product may vary by store.

• Assembled Width (in.): 17 in
• Irrigation System Component: Tubing
• Manufacturer Warranty: 1 year

• ✓ Easy to cut
• ✓ Use to distribute water to drippers, misters, and low volume sprinklers

• Manufacturer Warranty: None
• Tubing Length (ft.): 50
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Width (in.): 5.750 in

• Product Width (in.): 1.75 in
• Certifications and Listings: IAPMO Certified,NSF Listed
• Maximum working pressure (psi): 250
• Minimum working temperature (F): -40
• Material: PVC
• Actual inside diameter (in.): 1.25

• Application: Sewer & Drain,Water Supply
• Features: Flexible,Lead Free
• Returnable: 90-Day
• Non-toxic FDA grade compound: Yes
• Certifications and Listings: No Certifications or Listings
• Actual inside diameter (in.): .170

• Actual outside diameter (in.): 1.00
• Made with polyester braided reinforced PVC non-toxic material: Yes
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Pipe or Fitting Product Type: Pipe & Tubing
• Certifications and Listings: No Certifications or Listings
• Features: Flexible,Lead Free

• ✓ Flow rates are comparable to traditional insert fittings
• ✓ Contains no metal or chloride making it the most eco-friendly fitting on the market

• Color Family: Yellows / Golds
• Drip Irrigation Fitting Type: Coupling
• Connection: Male Hose Thread
• Product Width (in.): 1.125

9.5

• Product Width (in.): 9.5
• Application: Sewer & Drain,Water Supply
• Material: Low-Density Polyethylene (LDPE)
• Product Length (ft.): 100
• Non-toxic FDA grade compound: Yes
• Product Height (in.): 9.5

• ✓ Adjustable stainless steel screw reduces the radius by up to 25%
• ✓ Matched precipitation - allows for even water distribution
• ✓ Color coded - allows for easy identifications

• Manufacturer Warranty: 2 Year Limited Warranty
• Returnable: 90-Day

• ✓ Works with the most common sizes of 1/2 in. drip tubing (0.670-.710 O.D.)
• ✓ For outdoor use with cold water only

• Returnable: 90-Day
• Outer Diameter (in.): 0.5
• Pressure Rating: 80
• Product Width (in.): 2.25

• ✓ Pipe range OD: 1-1/4 in. to 2 in.
• ✓ Reverse weave and single wire bail
• ✓ Work load capacity of 2500 lbs.
• ✓ Various grip lengths, pipe ranges, and weaves available

• Package Quantity: 1
• Irrigation System Component: Accessory

• ✓ Cannot be used with a 6-zone valve (6-zone valve sold separately)
• ✓ Works on any 4 outlet model of the FIMCO indexing valve
• ✓ Active zones directly correspond with the numbers on the cam

• Returnable: 90-Day
• Package Quantity: 1

• ✓ Works with most 1/2 in. sprinklers
• ✓ PVC construction for durability
• ✓ Compatible with all Rain Bird MPR spray and shrub nozzles
• ✓ 1/2" male thread on both ends for easy connection
• ✓ Fits most Rain Bird nozzles that are used to irrigate ground cover and shrub areas

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Extra long filters provides longer time between cleanings
• ✓ Fixed center strip 15 ft. male spray nozzle - 4 ft. x 30 ft.

• Manufacturer Warranty: 2 Year Limited Warranty
• Irrigation System Component: Nozzle
• Package Quantity: 1

• ✓ Dimensions: 13/16 in. W x 1-5/16 in. H x 2-1/8 in. D
• ✓ Use for easy connections to Toro funny pipe (not included)
• ✓ Rated to 120 psi

• Material: Plastic (ABS)
• Manufacturer Warranty: 1 YR
• Package Quantity: 10