Watering Irrigation Irrigation Tubing For Sale In Little Rock

• ✓ Use with 1/4 in. barbed fittings and stakes
• ✓ Black color
• ✓ 25 to 30 psi recommended operating pressure

• Assembled Height (in.): 2 in
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Ideal for installation on difficult terrain such as on slopes, in oddly shaped areas and on windy sites
• ✓ Used for commercial and residential applications
• ✓ No special tools or glue are needed
• ✓ 100 of coverage with 1-GPH drippers every 12 in. with total of 100-drippers

• Color Family: Blacks
• Manufacturer Warranty: 3 years

• ✓ For outdoor use only
• ✓ Easy to install
• ✓ Do not insert fingers
• ✓ For cold water use only

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 2

• ✓ Drip line produces a flow rate of 1 GPH per each drip emitter at 10 PSI to 45 PSI
• ✓ Can be covered with mulch and used below or above the ground

• Inner Diameter (in.): .50
• Assembled Depth (in.): 23 in
• Assembled Height (in.): 6 in
• Returnable: 90-Day

• ✓ Connects sprinkler heads to lateral pipes
• ✓ Superior flexibility allows pipe to be efficiently routed around hardscape, terraces, and uneven terrain to turn landscape design into reality
• ✓ Up to 30% more flexible than competitors
• ✓ Operating temperature: 110°F

• Pressure Rating: 80
• Irrigation System Component: Tubing

• Color Family: Blacks
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .250
• Dimensions = 0.250 O.D. x 0.170 I.D.: Yes
• Returnable: 90-Day
• Assembled Height (in.): 2.7 in

• ✓ Rugged and flexible
• ✓ 50 foot coil
• ✓ .9 GPH (3.4 LPH) flow per emitter

• Pressure Rating: 30 psi
• Color Family: Browns / Tans
• Outer Diameter (in.): .63

• ✓ High-quality polyethylene material
• ✓ Conforms to strict ASAE standards for minimum inside diameter and wall thickness
• ✓ Used for connecting 1/2 in. hose to emitters and micro sprinklers

• Returnable: 90-Day
• Irrigation System Component: Tubing
• Color Family: Blacks

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Can be covered with mulch and used below or above the ground

• Assembled Height (in.): 4.75 in
• Color Family: Browns / Tans
• Assembled Width (in.): 18 in
• Pressure Rating: 50 psi

• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting
• ✓ No special tools or glues necessary for installation
• ✓ Versatile drip line saves money, time and water
• ✓ 100 ft. L
• ✓ Made from high quality, UV resistant materials
• ✓ Professional design

• ✓ 3-layer Matrix technology for improved strength and flexibility
• ✓ Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness
• ✓ Large inner diameter allows installation of long runs of tubing
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins

• Assembled Depth (in.): 17 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Easy to install
• ✓ 10 foot length
• ✓ Made of flexible PVC
• ✓ Use with 1/2 In. barb fittings to connect sprinkler heads

• Assembled Height (in.): 2.0 in
• Tubing Length (ft.): 10

• Assembled Height (in.): 1.75 in
• Color Family: Blacks
• Tubing Length (ft.): 50
• Saves water by delivering water right where it is needed most, at the plant root zone: Yes
• Drip Line/Tubing Type: Porous Tubing
• Returnable: 90-Day

• ✓ Ideal for watering vegetables and closely spaced plants
• ✓ A single 1/4 in. soaker line should not exceed 15 ft.
• ✓ Note: product may vary by store
• ✓ For drip irrigation applications only
• ✓ Easy to install

• Inner Diameter (in.): 0.25

0.25

• Outer Diameter (in.): 0.25
• Inner Diameter (in.): 0.25
• Color Family: Blacks
• Pressure Rating: 25
• Irrigation System Component: Pipe
• Assembled Depth (in.): 3 in

• Maximum working pressure (psi): 225
• Application: Sewer & Drain,Water Supply
• Minimum working temperature (F): 25
• Higher pressure ratings: Yes
• Features: Flexible,Lead Free
• Pipe & Tubing Product Type: Specialty

• ✓ Releases PVC-lock fittings from PVC pipe
• ✓ Works on 1/2 in., 1 in. and 3/4 in. PVC-lock fittings
• ✓ Fittings that have been exposed to excessive water pressure and/or water hammer may be difficult to remove

• Product Height (in.): 7.25
• Irrigation Tool Type: Adjustment Tool
• Material: Aluminized Steel

• Certifications and Listings: No Certifications or Listings
• Product Depth (in.): 120
• Pipe Size: 1/4"
• Application: Sewer & Drain,Water Supply
• Actual outside diameter (in.): .375
• Pipe & Tubing Product Type: Specialty

• Maximum working pressure (psi): 10
• Certifications and Listings: No Certifications or Listings
• Minimum working temperature (F): 25
• Weather resistant: Yes
• Features: Flexible,Lead Free
• Product Weight (lb.): 1.9lb

• ✓ Made of durable, UV-resistant materials for years of dependable use
• ✓ Unique release feature simplifies installation and maintenance
• ✓ Convenient installation and maintenance

• Product Length (in.): 1.75
• Inner Diameter (in.): 0.5
• Product Height (in.): 1.25

• ✓ Works with the most common sizes of 1/2 in. drip tubing (0.690, 0.700 and 0.710 O.D.)
• ✓ For drip irrigation applications only
• ✓ Easy to use

• Product Width (in.): 1.75
• Manufacturer Warranty: None
• Returnable: 90-Day

• ✓ 1/4 Inch wide
• ✓ Easy to attach Drip fittings
• ✓ UV-resistant

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Pressure Rating: 25 psi
• Color Family: Blacks

• Product Width (in.): 1.625
• Inner Diameter (in.): 1
• O-ring material: EPDM: Yes
• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information
• Color Family: Yellows / Golds
• Outer Diameter (in.): 1.315

• ✓ Use as pneumatic control line
• ✓ Non-toxic FDA grade compound

14

• Product Width (in.): 14
• Product Weight (lb.): 5.3lb
• Pipe or Fitting Product Type: Pipe & Tubing
• Product Height (in.): 14

• ✓ Rated to 120 PSI
• ✓ No glue or clamps required
• ✓ Cushions sprinkler to protect against damage

• Inner Diameter (in.): .375
• Material: ABS Plastic
• Irrigation System Component: Fittings & Connectors

• ✓ 5 screw driver bits for adjusting spray heads and cleaning nozzles
• ✓ Keep a variety of sprinkler tools on hand in one convenient package
• ✓ Stem clip for easy nozzle replacement
• ✓ Punch tool for micro-irrigation
• ✓ 2 gear drive tools to adjust spray pattern and distance

• Irrigation Tool Type: Adjustment Tool

• ✓ Work load capacity of 2000 lbs.
• ✓ Reusable
• ✓ Made without swivel
• ✓ Various grip lengths, pipe ranges, and weaves available
• ✓ Multi-purpose grip

• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information.