Watering Irrigation Irrigation Tubing For Sale In Laredo

• ✓ Long lasting virgin material
• ✓ Extend drip emitters and microsprinklers from main line
• ✓ Made of high quality, linear low-density polyethylene resin
• ✓ Maximum recommended operating pressure: 60 psi

• Tubing Length (ft.): 100
• Inner Diameter (in.): 0.25

• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ Can be covered with mulch and used below or above the ground
• ✓ Drip line produces a flow rate of 1 GPH per each drip emitter at 10 PSI to 45 PSI

• Returnable: 90-Day
• Manufacturer Warranty: 5 year warranty
• Pressure Rating: 10-50 PSI; recommended operating pressure: 25 PSI

• ✓ Allows water to drip directly to the root zone, delivering a beneficial deep watering
• ✓ No special tools or glue are needed

• Pressure Rating: 25
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: 5
• Assembled Width (in.): 14.5 in

• Inner Diameter (in.): .165
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Returnable: 90-Day
• Tubing Length (ft.): 250
• Assembled Height (in.): 14.6 in

• ✓ Durable construction provides for many years of use
• ✓ Sized to 0.700 in. Outside diameter

• Assembled Width (in.): 17.000 in
• Manufacturer Warranty: None
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day

• ✓ Use with emitter tubing and spot watering emitters
• ✓ To water plants, add 1/4 in. tubing barbed couplings or drippers
• ✓ 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.

• Assembled Height (in.): 3.8 in
• Irrigation System Component: Tubing
• Tubing Length (ft.): 100

• ✓ Use with Toro funny pipe fittings
• ✓ Inside diameter: 0.495 in. ± 0.005 in.; Outside diameter: 0.70 in.

• Outer Diameter (in.): .7
• Returnable: 90-Day
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): .495

1.125 in

• ✓ Glues to standard PVC fittings
• ✓ Glues to standard PVC fittings for easy installation
• ✓ Ideal for repairs to piping systems

• Assembled Height (in.): 1.125 in
• Assembled Width (in.): 1.125 in
• Tubing Length (ft.): 2

• ✓ Dimensions = 0.710 O.D. x 0.620 I.D.
• ✓ Factory-installed emitters cut installation time
• ✓ Manufactured using 3-layer matrix technology to provide superior strength and flexibility

• Pressure Rating: 60
• Irrigation System Component: Tubing
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration
• ✓ 60 PSI pressure rating
• ✓ Designed to work with Toro Blue Stripe drip-irrigation products
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins

• Inner Diameter (in.): .62
• Outer Diameter (in.): .71

• ✓ Made from durable materials for long life in the landscape
• ✓ 500 ft. in length

• Assembled Height (in.): 11 in
• Color Family: Blacks
• Assembled Depth (in.): 5.5 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ A single 1/4 in. soaker line should not exceed 15 ft.
• ✓ 1/4 in. wide tubing
• ✓ Ideal for slow, deep root watering

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Manufacturer Warranty: None

• ✓ Helps makes sprinkler installation quick and easy with no cutting, glue or clamps required
• ✓ 8 in. funny pipe

• Assembled Depth (in.): 10.75 in
• Assembled Width (in.): 2.13 in
• Manufacturer Warranty: 1 YR
• Pressure Rating: 120 psi

• ✓ Made in North America
• ✓ Suitable for use with liquids, chemicals and gases
• ✓ Temperature range +25°F to +150°F

• Product Length (ft.): 10
• Pipe or Fitting Product Type: Pipe & Tubing
• Certifications and Listings: No Certifications or Listings

• ✓ No special tools or glues necessary for installation
• ✓ Made from high quality, UV resistant materials

• Tubing Length (ft.): 50
• Manufacturer Warranty: 3 Years
• Drip Line/Tubing Type: Porous Tubing
• Assembled Height (in.): 1.75 in

• ✓ Use as pneumatic control line
• ✓ Temperature range -40°F to +150°F

• Product Height (in.): 9.5
• Product Depth (in.): 3
• Product Length (ft.): 100
• Actual inside diameter (in.): .188

• ✓ Use as flexible drain line
• ✓ Non-toxic FDA grade compound

• Product Depth (in.): 120
• Product Height (in.): .312
• Minimum working temperature (F): 25
• Pipe Size: 3/8"

1.25

• Product Width (in.): 1.25
• Product Height (in.): 1.25
• Material: Vinyl
• Actual outside diameter (in.): 1.25
• Pipe & Tubing Product Type: Specialty
• Product Depth (in.): 120

• Fitting Type: Compression Fittings
• Resistance causes a compression seal that the water cannot penetrate: Yes
• Product Length (in.): 10 in
• Outer Diameter (in.): .50
• Drip Irrigation Fitting Type: Elbow
• Product Width (in.): 10

• ✓ Replacement thumb screw
• ✓ Easy to install
• ✓ Made of solid brass
• ✓ For use with float valves

• Package Quantity: 1
• Returnable: 90-Day

• ✓ .8 GPH per emitter spaced every 12 in.
• ✓ 100 ft. of drip soaker tape can water most medium to large gardens

• Included: Backflow Preventer,Tubing
• Kit Type: Planters
• Number of pieces included: 19
• Returnable: 90-Day

• ✓ Jet stream nozzle is ideal for tunneling under driveways, sidewalks and walkways
• ✓ Connects to standard garden hose
• ✓ Connects to standard garden hoses for optimal use
• ✓ Durable construction for long-lasting use
• ✓ Durable construction
• ✓ Jet stream nozzle works great for tunneling under driveways

• Returnable: 90-Day
• Manufacturer Warranty: 3 Year Warranty
• Adjustable 0-10 GPH flow rate: Yes
• Tubing Size: Fits All Tubing Sizes
• Pressure Rating: 25 psi
• Irrigation System Component: Drip Irrigation Emitter

• ✓ Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit
• ✓ Contains UV inhibitors to protect against direct sun exposure

• Color Family: Blacks
• Manufacturer Warranty: 3 years
• Connection: Barb x Barb x Barb
• Fitting Type: Barb Fittings

• ✓ Connect 3/4 in. garden hose or hose thread to 1/2 in. poly tubing
• ✓ 3/4 in. FHT x 1/2 in. (0.700 O.D.) compression fitting

• Material: ABS Plastic
• Returnable: 90-Day
• Package Quantity: 1
• Drip Irrigation Fitting Type: Adapter

• ✓ 8 - 15 ft. throw
• ✓ Nozzle screen maintains water adjustment & prevents clogging
• ✓ Tactile left-edge indicator is ideal for watering odd-shape areas
• ✓ Matched Flow Rate assures uniform watering when different patterns are mixed on the same zone
• ✓ Spray distance adjusts from 11 ft. to 15 ft. for your convenience

• Irrigation System Component: Nozzle

• Product Depth (in.): 72
• Pipe Size: 1-1/4"
• Pipe & Tubing Product Type: Specialty
• Pipe or Fitting Product Type: Pipe & Tubing
• Application: Sewer & Drain,Water Supply
• Features: Flexible,Lead Free