Watering Irrigation Irrigation Tubing For Sale In Barrie

0.25

• Pressure Rating: 60 psi
• Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb connector: Yes
• Inner Diameter (in.): 0.25
• Tubing Length (ft.): 50
• Drip Line/Tubing Type: Porous Tubing
• Outer Diameter (in.): 0.25

18.5 in

• Pressure Rating: 35 psi
• Tubing Length (ft.): 200
• Assembled Width (in.): 18.5 in
• Outer Diameter (in.): .620
• Assembled Depth (in.): 18.5 in
• Returnable: 90-Day

• ✓ For drip irrigation applications only
• ✓ For cold water use only
• ✓ Use to distribute water to drippers, misters, and low volume sprinklers
• ✓ 1/4 Inch wide

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 50

• ✓ 1 to 60 psi pressure rating
• ✓ Large inner diameter allows installation of long runs of tubing

• Returnable: 90-Day
• Irrigation System Component: Tubing
• Manufacturer Warranty: 1 year
• Pressure Rating: 1 to 60 psi

• ✓ Extend drip emitters and microsprinklers from main line
• ✓ Long lasting virgin material
• ✓ Made from UV resistant materials for a long life in the landscape
• ✓ For use above or below ground

• Color Family: Blacks
• Inner Diameter (in.): 0.25

• Assembled Depth (in.): 10.50 in
• Returnable: 90-Day
• Assembled Height (in.): 2.7 in
• Pressure Rating: 161 psi
• Conforms to strict ASAE standards for minimum inside diameter and wall thickness: Yes
• Manufacturer Warranty: 1 YR

• ✓ The brown finish easily blends in with your soil and landscape
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

• Pressure Rating: 25 psi
• Drip Line/Tubing Type: Porous Tubing
• Assembled Width (in.): 9 in
• Color Family: Browns / Tans

• ✓ Additional emitters sold separately
• ✓ Enjoy less work and more leisure in your garden
• ✓ No need to blow out or drain in winter conditions
• ✓ Can water up to 60 containers
• ✓ Extremely durable for all-weather performance, yet easy to cut with scissors

• Returnable: 90-Day

• ✓ 60 ft. in length
• ✓ For outdoor use and cold water only

• Drip Line/Tubing Type: Porous Tubing
• Assembled Depth (in.): 7.000 in
• Inner Diameter (in.): 0.25
• Manufacturer Warranty: None

• ✓ Total of 100 1 GPH PC drip emitters per 100 ft. of dripline
• ✓ Consists of 100 ft. of 1/2 in. with .700 OD pressure compensating (PC) dripline
• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas or loops around trees.

• Pressure Rating: 10-45 PSI
• Assembled Height (in.): 6 in
• Assembled Width (in.): 17.5 in

• ✓ Combine up to five 50 ft. coils to extend your watering coverage up to 250 ft.
• ✓ 0.63 in. O.D., 0.54 in. I.D.
• ✓ Its direct, subsurface watering of the plant root zone produces faster, healthier growth, higher vegetable yields, and colorful, long lasting floral blooms

• Outer Diameter (in.): .70
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Pressure Rating: 60

• Maximum working pressure (psi): 40
• Minimum working temperature (F): 25
• Pipe & Tubing Product Type: Specialty
• Returnable: 90-Day
• Features: Flexible,Lead Free
• Actual inside diameter (in.): .170

• ✓ For cold water use only
• ✓ Easy to install
• ✓ Sized to 0.700 in. Outside diameter
• ✓ Black in color

• Returnable: 90-Day
• Assembled Width (in.): 17.000 in

• ✓ Reduces the need for multiple tools
• ✓ Adjust spray pattern, spray distance and replace nozzles
• ✓ For use with the Voyager II gear-drive rotor, sold separately

• Manufacturer Warranty: None
• Product Height (in.): 8.75
• Irrigation System Component: Irrigation Tool

• ✓ Low-flow 1.0 GPH
• ✓ Non-pressure compensating

• Dripper Type: Flag
• Gallons per Hour: 1
• Returnable: 90-Day
• Color Family: Blacks

• ✓ Not recommended for non-Orbit valves and Orbit valves with a side mounted bleed lever
• ✓ Provides easy installation
• ✓ For cold water use only
• ✓ For irrigation applications only

• Manufacturer Warranty: 3
• Irrigation System Component: Solenoid

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ 25 psi pressure regulator reduces incoming water pressure to the ideal working pressure for a drip system
• ✓ Easy to install
• ✓ Swivel adapter connects and secures the 1/2 (0.700 in. O.D.) poly tubing without glue or clamps, providing a simple connection method, using a simple wrist action, the polyethylene drip tubing is "walked" into the fittings for a very tight fit with no tools, glues or clamps required

• Fitting Type: Drip Adapters
• Pressure Rating: 25

.50

• ✓ Resistance causes a compression seal that the water cannot penetrate
• ✓ BLACK fittings are 0.600 I.D. (inside diameter) x 0.700 O.D. (outside diameter)

• Outer Diameter (in.): .50
• Inner Diameter (in.): .50
• Pressure Rating: 60
• Fitting Type: Compression Fittings

• ✓ Use with 1/2 in., 0.600 in. I.D. drip tubing or pressure compensating brown drip line
• ✓ No special tools, clamps or glue are needed
• ✓ 1-piece construction

• Fitting Type: Barb Fittings
• Inner Diameter (in.): .50
• Manufacturer Warranty: 1 Year

.50

• Product Length (in.): 5 in
• Outer Diameter (in.): .50
• Fitting Type: Barb Fittings
• Manufacturer Warranty: 3 Year Warranty
• Inner Diameter (in.): .50
• Material: ABS Plastic

• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information
• Pressure Rating: 10-80 PSI
• Inner Diameter (in.): 1
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Body material: ABS: Yes
• Package Quantity: 25

• ✓ Matched precipitation rate
• ✓ 90° nozzle

• Irrigation System Component: Nozzle
• Returnable: 90-Day
• Manufacturer Warranty: 1 year

• ✓ NSF/IAPMO Compliant
• ✓ Non-toxic FDA compound
• ✓ Temperature range 0°F to +150°F

• Material: PVC
• Returnable: 90-Day
• Actual outside diameter (in.): 1.31

• ✓ Use to install a drip irrigation and micro-sprayer system from a hose faucet
• ✓ Kit also includes 20, ¼ in. micro tubing stake, 10 ¼ in. tee, 12¼ in. barbs,10 ½ in. stake to hold the tubing to the ground,4, ½ in. tee, one, ½ in. coupling, 4 ½ in. elbow, hole punch, one set of 10 goof plug, and 8 hose end to close the end of the ½ in.

• Manufacturer Warranty: 3 Year Warranty
• Color Family: Blacks
• Returnable: 90-Day
• Number of pieces included: 124

• Color Family: Blacks
• Kit has everything you need to get started with drip irrigation and stop watering your plants by hand: Yes
• Included: Pressure Regulator,Stakes,Timer,Tubing
• Package Quantity: 1
• Manufacturer Warranty: 2 YEAR LIMITED
• Number of pieces included: 41

• Actual inside diameter (in.): 1
• Product Height (in.): 18
• Made in North America: Yes
• Application: Sewer & Drain,Water Supply
• Certifications and Listings: No Certifications or Listings
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

• ✓ Total satisfaction policy
• ✓ For use in a sprinkler and irrigation system
• ✓ Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from 0.630 in. to 0.700 in.

• Color Family: Blacks
• Fitting Type: Push to Connect Fittings
• Product Length (in.): 18.300 in