Watering Irrigation Drip Irrigation Tubing For Sale In Tampa

• ✓ Dimensions = .710 O.D. x .620 I.D.
• ✓ 1 to 60 psi pressure rating
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness

• Manufacturer Warranty: 1 year
• Inner Diameter (in.): .62

• ✓ Made of high-quality polyethylene that is flexible and contains no harmful chemicals
• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution

• Inner Diameter (in.): .170
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Depth (in.): 10.5 in
• Assembled Height (in.): 2.7 in

• ✓ Accepts standard black insert, 0.700 compression fittings, brown barbed fittings or DIG Nut Lock fittings
• ✓ Consists of 100 ft. of 1/2 in. with .700 OD pressure compensating (PC) dripline
• ✓ Maximum run length of 202 ft. can be achieved from a single water source at 45 psi

• Returnable: 90-Day
• Assembled Width (in.): 17.5 in
• Assembled Height (in.): 6 in

• ✓ 1/2 GPH flow rate from each emitter
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ 12 in. pre-inserted emitter spacing

• Returnable: 90-Day
• Assembled Height (in.): 9 in
• Irrigation System Component: Tubing

24 in

• ✓ Sized to 0.7 in. outside diameter
• ✓ Easy to install
• ✓ For outdoor use only

• Assembled Width (in.): 24 in
• Assembled Depth (in.): 24 in
• Inner Diameter (in.): 0.5

• ✓ 1-gallon per hour emitters installed every 18 in.
• ✓ Manufactured using 3-layer matrix technology to provide superior strength and flexibility
• ✓ Larger-diameter tubing allows for more emitters on the same line

• Returnable: 90-Day
• Assembled Depth (in.): 24 in
• Irrigation System Component: Tubing

• ✓ No special tools or glues necessary for installation
• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb connector

• Outer Diameter (in.): 0.25
• Returnable: 90-Day
• Assembled Width (in.): .7 in
• Irrigation System Component: Tubing

• ✓ Rugged and flexible, easy to unroll and stake in the garden, flower bed, ground cover or other landscaped areas
• ✓ Professional choice
• ✓ Waters uniformly throughout the planting area, improving plant health and growth
• ✓ Clog-resistant pressure compensating emitters

• Tubing Length (ft.): 100
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• Pressure Rating: 161 psi
• High-quality polyethylene material: Yes
• Assembled Width (in.): 10.5 in
• Manufacturer Warranty: 1 YR
• Inner Diameter (in.): .17
• Assembled Depth (in.): 10.50 in

• ✓ Can be installed above or below ground
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
• ✓ Bending radius: 1 ft.

• Assembled Width (in.): 17.5 in
• Outer Diameter (in.): .50

• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems products, may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Allows water to drip directly to the root zone, delivering a beneficial deep watering

• Assembled Depth (in.): 13.5 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Pressure Rating: 25
• Irrigation System Component: Tubing

• Outer Diameter (in.): .50
• Drip Irrigation Fitting Type: Elbow
• Material: ABS Plastic
• Connection: Comp
• Product Length (in.): 2.5
• Blue fittings work with a 0.710 O.D. (outside diameter) poly tubing: Yes

• Drip Irrigation Fitting Type: Adapter
• Use with 1/2 in., 0.600 in. I.D. drip tubing or pressure compensating brown drip line: Yes
• Product Width (in.): 4
• Outer Diameter (in.): .50
• Manufacturer Warranty: 1 Year
• Connection: Barb x Barb

• ✓ Contains no metal or chloride making it the most eco-friendly fitting on the market
• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
• ✓ Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe
• ✓ For use on all manufacturers' NSF #80, #100, or #160 polyethylene pipe

• Outer Diameter (in.): 1.315
• Pressure Rating: 10-80 PSI

• ✓ Cap rotates for adjustable, low-volume watering up to 3'
• ✓ Emits 5 streams of water similar to a sprinkler head of an underground system
• ✓ Half circle pattern
• ✓ For use with 1/4 in. drip irrigation tubing

• Package Quantity: 2
• Irrigation System Component: Drip Irrigation Emitter

• ✓ Accepts standard black insert, 0.700 compression fittings, brown barbed fittings or DIG Nut Lock fittings
• ✓ Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Flexible tubing for easy installation; no special tools or glue are needed
• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas or loops around trees.

• Inner Diameter (in.): 0.50
• Assembled Width (in.): 24 in

• ✓ Complete kit; covers up to 700 sq. ft. (can be easily expanded) contains 5 micro sprayer assemblies, 13 in. spike and micro tubing with barb, including three 360 Degree, four 180 Degree and four 90 Degree patterns, and 50 1-GPH PC button drip emitters, applies water at a very low application rate leading to less surface evaporation from leaves and soil, micro sprayers are useful as water remains in the upper soil layers where the roots are developing, offers flexibility in irrigation frequency and application rate leading to minimized surface compacting and runoff
• ✓ Featured a hose end solar powered timer with large, easy-to-read LCD screen and simple, icon-based programming with weekly or cyclical programs, 4 start times per day, durations of up to 6 hours, program delay of up to 99 days, system off, manual operation, and a sensor wire connection to accept a rain sensor, the timer's manual irrigation cycle can be performed via the manual program button use to water roses, shrubs, groundcovers, flowerbeds and trees, ideal for hillsides
• ✓ Operating pressure: 25 to 30 psi (25 psi pressure regulator included), maximum recommended flow rate: 220 GPH (3.7 GPM) drip poly tubing size: 200 ft. with .600 I.D. x .700 O.D., drip micro tubing (vinyl) size: 50 ft. with .156 I.D. x .245 O.D.

• Package Quantity: 1
• Kit Type: Drip Irrigation Kit
• Included: Backflow Preventer,Pressure Regulator,Timer,Tubing,Tubing Clips

• ✓ Superior flexibility allows pipe to be efficiently routed
• ✓ Connects sprinkler heads to lateral pipes
• ✓ Helps protect heads and pipes from damage by equipment
• ✓ Textured surface makes product easier to handle

• Assembled Depth (in.): 6 in
• Tubing Length (ft.): 6

• ✓ No glue or clamps required
• ✓ Works with any typical spray or rotating sprinkler with a male or female inlet
• ✓ Use with Toro funny pipe fittings (not included)

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Pressure Rating: 120

• Maximum Gallons Per Minute: 0.016
• Spray Pattern: Drip
• Pressure Rating: 25 psi
• Product Height (in.): 6.5
• Package Quantity: 25
• Product Width (in.): 5

• ✓ Requires no glue or special tools for installation
• ✓ Filters is easily removed for cleaning and maintenance

• Inlet Diameter (in.): 0.75
• Irrigation System Component: Accessory
• Returnable: 90-Day
• Inlet Thread Type: FHT

• ✓ UV resistant plastic for long life
• ✓ Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from 0.630 in. to 0.700 in.
• ✓ For drip applications

• Material: Plastic
• Product Length (in.): 18.300 in
• Inner Diameter (in.): .63

• Color Family: Blacks
• 25 psi suggested operating pressure: Yes
• Material: ABS Plastic
• Outer Diameter (in.): .75
• Drip Irrigation Fitting Type: Adapter
• Fitting Type: Compression Fittings

• ✓ Drip irrigation maintenance and repair expansion bucket features DIG's versatile, color-coded, pressure-compensating drippers in 3 flow rates (1, 2, and 4 GPH) to efficiently repair, add to, or modify your exiting drip system; the kit is economically priced well below the cost of the individual parts combined
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check with local water provider) includes DIG's free drip irrigation guide to installing a drip irrigation system

• Color Family: Blacks
• Kit Type: Drip Irrigation Kit
• Irrigation System Component: Kit
• Manufacturer Warranty: 3 Year warranty

• Color Family: Blacks
• Pressure Rating: 80
• Material: Polyethylene
• Includes filter: Yes
• Manufacturer Warranty: 5
• Inner Diameter (in.): 0.5

1

• Product Width (in.): 1
• Maximum Gallons Per Minute: .016
• Gallons per Hour: 1
• Dripper Type: Button
• Irrigation System Component: Drip Irrigation Emitter
• Non-pressure compensating, low flow 1 GPH: Yes

• Package Quantity: 10
• Maximum Gallons Per Minute: .235
• Product Height (in.): 8
• Pressure Rating: 25 psi
• Returnable: 90-Day
• Rotation of the cap allows adjustment of flow and diameter of throw down to a complete shut-off via a ratchet mechanism on the cap and a notch on the base: Yes