Agiseek home

Watering Irrigation Drip Irrigation Tubing For Sale In Oklahoma

Become a Partner
1/4 in. x 50 ft. Emitter Tubing 12 in. Spacing
Prices start at : 7.97 USD / each

Emitter Tubing is ideal for extending watering to narrow planting areas and container plants. Flexible 1/4 in. Each emitter is spaced 12 in. Apart and emits 1 GPH (gallons per hour) of water.
  •  50 ft. coil
  •  Flexible for easy installation
  •  Attach to 1/2" Drip tubing with 1/4" barbed fittings; compatible with most 1/4" fittings
  •  Works like soaker hose - only better
  • Drip Line/Tubing Type: Porous Tubing
  • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
United States
Oklahoma
1/4 in. x 500 ft. Emitter Tubing with 12 in. Spacing
Prices start at : 67.12 USD / each

The micro drip line's cylindrical labyrinth-like drip emitters are built into the interior wall of the 1/4 in. It's also ideal for narrow planting areas, or anywhere total saturation is desired along the drip line path, where it can prevent the discoloration...

0.25

    • Color Family: Blacks
    • Manufacturer Warranty: 5
    • Outer Diameter (in.): 0.25
    • Pressure Rating: 25
    • Drip Line/Tubing Type: Drip or Emitter Line Tubing
    • Inner Diameter (in.): 0.25
    United States
    Oklahoma
    1/4 in. x 60 ft. Drill Soaker Tube
    Prices start at : 7.36 USD / each

    The Orbit 1/4 in. The tubing has drilled pores every 6 in. Drill Soaker Tubing is easy to install. Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens.
    •  A single 1/4 in. soaker line should not exceed 15 ft.
    •  1/4 in. wide tubing
    •  Ideal for slow, deep root watering
    • Tubing Length (ft.): 60
    • Manufacturer Warranty: None
    • Irrigation System Component: Tubing
    United States
    Oklahoma
    1/4 in. x 100 ft. Distribution Tubing
    Prices start at : 5.47 USD / each

    Connect with Rain Bird 1/4 in. 100 foot coil that can be cut to needed lengths to water plants. Barbed fittings and stakes. O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants.
    • Tubing Length (ft.): 100
    • Pressure Rating: 70 psi
    • Color Family: Blacks
    • Use with 1/4 in. barbed fittings and stakes: Yes
    • Assembled Width (in.): 8 in
    • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
    United States
    Oklahoma
    Blue Stripe Drip 1/2 in. x 50 ft. Tubing
    Prices start at : 13.36 USD / each

    Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular, flexible inner core. It is UV resistant and has been consistently tested in agriculture and greenhouse applications.
    •  60 psi pressure rating
    •  Large inner diameter allows installation of long runs of tubing
    • Outer Diameter (in.): .71
    • Assembled Width (in.): 18.5 in
    • Color Family: Blacks
    • Returnable: 90-Day
    United States
    Oklahoma
    1/2 in. 0.710 OD Compression Coupling
    Prices start at : 0.77 USD / each

    Poly tubing and create a strong, water tight seal without the use of glues or special tools. Easily connect 1/2 in. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape.
    •  Blue fittings work with a .710 OD (outside diameter) poly tubing
    •  No special tools or glues needed
    •  Resistance causes a compression seal that the water cannot penetrate
    • Material: ABS Plastic
    • Product Length (in.): 1 in
    • Inner Diameter (in.): 0.75
    United States
    Oklahoma
    Drip System Expansion and Repair Kit
    Prices start at : 24.97 USD / each

    The Rain Bird Drip Repair and Expansion Kit provides the most commonly needed drip devices and tubing in a handy pail you can use season after season to keep any system watering efficiently or to extend drip irrigation to additional plants and adjoining...
    •  Organizer tray is filled with 112 universal drip irrigation devices
    •  Replace non-working devices with Rain Bird's clog resistant, pressure compensating emitters
    •  Convenient & portable storage dispenser includes 250 ft. of 1/4 in. tubing
    • Included: Filter,Garden Hose Connection,Sprinklers,Stakes
    • Color Family: Blacks
    • Returnable: 90-Day
    United States
    Oklahoma
    Sprinkler Riser-Drip Conversion Kit
    Prices start at : 9.97 USD / each

    Sprinkler riser. Constructed of molded ultraviolet-resistant high impact plastic, the Sprinkler Riser to Drip Conversion Kit allows a 1/2 in. The 25 psi pressure regulator reduces the outgoing pressure, providing protection to the zone.

    .50

      •  Maximum operating pressure: up to 100 psi, flow rate: up to 5 GPM; outlet preset pressure: 25 psi
      •  Kit includes: one 1/2 in. adapter, one 25 psi pressure regulator, and 1 swivel tee with 60 mesh screen
      • Inner Diameter (in.): .50
      • Returnable: 90-Day
      • Outer Diameter (in.): .50
      • Color Family: Blacks
      United States
      Oklahoma
      Fast Fittings 1 in. x 1 in. x 1 in. Insert Tee (25-Pack)
      Prices start at : 46.62 USD / bag

      Insert Tee is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.
      •  Flow rates are comparable to traditional insert fittings
      •  Contains no metal or chloride making it the most eco-friendly fitting on the market
      •  Suggested operating pressure is 10-80 PSI
      •  Friction loss is comparable to traditional insert fittings
      • Drip Irrigation Fitting Type: Coupling
      • Product Length (in.): 5.875
      United States
      Oklahoma
      Blue Stripe 1/2 in. x 100 ft. Drip Tubing
      Prices start at : 15.75 USD / each

      Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular, flexible inner core. It is UV resistant and has been consistently tested in agriculture and greenhouse applications.
      •  Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration
      •  Large inner diameter allows installation of long runs of tubing

      17 in

        • Pressure Rating: 60 psi
        • Assembled Width (in.): 17 in
        • Assembled Depth (in.): 17 in
        • Tubing Length (ft.): 100
        United States
        Oklahoma
        3/4 in. x 1/2 in. FHT x MHT Hose Adapter
        Prices start at : 1.98 USD / each

        Hose and 1/2 in. Hose (not included). Install this 3/4 in. For drip or micro-irrigation applications. FHT x MHT Hose Adapter in your drip or micro-irrigation system. This will create a connection between 3/4 in.
        •  Can unscrew hose connection from faucet as needed
        •  Total Satisfaction Policy
        •  Use to run water from faucet to the planting area
        •  One 3/4 in. FHT connection and one 1/2 in. drip tubing connection
        •  Creates a connection between 3/4 in. hose and 1/2 in. drip tubing
        •  Screw one end onto faucet and push drip tubing into other end
        United States
        Oklahoma
        Fast Fittings 1 in. x 1/2 in. FPT Insert Elbow (25-Pack)
        Prices start at : 28.88 USD / bag

        FPT Insert Elbow is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.
        •  Slips easily into pipe without the need for tools, clamps, or extra fittings
        •  Contains no metal or chloride making it the most eco-friendly fitting on the market
        • Color Family: Yellows / Golds
        • Package Quantity: 25
        • Returnable: 90-Day
        • Drip Irrigation Fitting Type: Coupling
        United States
        Oklahoma
        Maverick 4 GPH 12-Outlet Drip Manifold
        Prices start at : 8.66 USD / each

        12-outlet drip irrigation manifold provides a quick solution for saving water. The DIG Maverick 1/2 in. Easily convert a sprinkler riser to a 12-outlet drip system. Incorporating a Maverick drip manifold can save water while increasing your plants health...
        •  Can be used with 1/4 in. drip-line, DIG model SH50
        •  Features a removable nozzle for easy replacement and maintenance
        •  Connects to 1/2 in. sprinkler risers
        • Package Quantity: 1
        • Included: Stakes,Tubing
        • Irrigation System Component: Kit
        United States
        Oklahoma
        6 in. x 1/2 in. x 3/4 in. Swing Pipe Assembly
        Prices start at : 2.3 USD / each

        The Rain Bird SA65 6 in. Swing Pipe Assembly is a flexible swing assembly that connects sprinkler heads to lateral pipes. Textured surface makes product easier to handle, contributing to labor efficiency, especially under wet conditions.
        •  Textured surface makes product easier to handle
        •  Up to 30% more flexible than competitors
        •  Operating pressure: 80 psi
        •  Quick and easy installation lowers material and labor costs
        •  Connects sprinkler heads to lateral pipes
        • Returnable: 90-Day
        United States
        Oklahoma
        Drip Half Pattern Bubbler on Stake
        Prices start at : 2.82 USD / each

        Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro bubbler flow and height. It is ideal for taller plants such as shrubs and bushes as well as for use in flower beds and ground...
        •  Pre-attached 36 in. L of 1/4 in. tubing with barbed fitting
        •  Sturdy staked riser with adjustable height up to 18 in.
        •  Half circle coverage, 0 ft. - 3 ft. watering distance
        • Product Height (in.): 15.5
        • Color Family: Blacks
        • Product Width (in.): 2
        United States
        Oklahoma
        1/2 in. 0.700 OD Compression Elbow
        Prices start at : 0.98 USD / each

        Create a water-tight seal between two pieces of 1/2 in. Deep by walking or wiggling the drip tubing back and forth into the fitting. Hold the compression fitting in one hand and the tubing in the other and force the poly tubing into the fitting about...
        • Color Family: Blacks
        • Product Width (in.): 2.25
        • Product Length (in.): 2.25 in
        • Manufacturer Warranty: 3 Year Warranty
        • Light and compact design: Yes
        • Inner Diameter (in.): .50
        United States
        Oklahoma
        1/2 in. Drip-Lock Hose Faucet Adapter
        Prices start at : 1.58 USD / each

        This easy-to-push-on Coupling works with the most common sizes of 1/2 in. It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance.
        •  Easy-to-push-on fitting
        •  Convenient installation and maintenance
        • Product Length (in.): 1.75
        • Drip Irrigation Fitting Type: Adapter
        • Manufacturer Warranty: 1 Year Limited
        • Outer Diameter (in.): 0.5
        United States
        Oklahoma
        1/2 in. Riser Adapter with 1/4 in. Micro Tubing Barb
        Prices start at : 1.86 USD / each

        Riser while still retaining the ability to have full flow to the sprinkler head. Micro tubing to a 1/2 in. Use in conjunction with drippers, micro sprinklers, or other low-volume emitters for large containers, pots or individual plants and trees.
        • Product Height (in.): 2
        • Drip Irrigation Fitting Type: Adapter
        • Returnable: 90-Day
        • For use with all 1/4 in. micro tubing - poly or vinyl: Yes
        • Manufacturer Warranty: 3 Year Warranty
        • Inner Diameter (in.): .50
        United States
        Oklahoma
        1/4 in. Barbed Couplings (10-Pack)
        Prices start at : 3.78 USD / each

        Barbed Couplings (10-Pack) help you connect pieces of hose. Designed for use in your sprinkler and irrigation system. These couplings are barbed and non-threaded.
        •  10 pack
        •  Total Satisfaction Policy
        • Returnable: 90-Day
        • Inner Diameter (in.): .25
        • Drip Irrigation Fitting Type: Coupling
        • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
        United States
        Oklahoma
        360-Degree Adjustable Drippers (10-Pack)
        Prices start at : 5.29 USD / each

        The DIG Adjustable-Flow Multi-Stream Dripper offers controlled watering feature to accommodate a variety of different plants within your system. As your plants grow the flow can be increased as they require more water to flourish.

        0.5

          • Package Quantity: 10
          • Tubing Size: Fits All Tubing Sizes
          • Product Depth (in.): 0.5
          • High-quality, UV resistant materials for long life in the landscape: Yes
          • Product Width (in.): 0.5
          • Maximum Gallons Per Minute: 0.235
          United States
          Oklahoma
          1/2 in. PVC Pipe Thread x Hose Thread Conversion Elbow
          Prices start at : 2.17 USD / each

          Wrap two to three rounds of TEFLON tape on the ½ in. This allows connection of a ¾ in. Hose thread outlet. Female hose thread (FHT) to drip irrigation tubing or to a garden hose with a ¾ in.
          •  1/2 in. FPT x 3/4 in. MHT
          •  Made of durable PVC for long life in the landscape
          • Product Length (in.): 2.125 in
          • Returnable: 90-Day
          • Connection: FIP x MHT
          • Inner Diameter (in.): .50
          United States
          Oklahoma
          Faucet Connection Kit
          Prices start at : 11.97 USD / each

          This Rain Bird Faucet Connection Kit provides a simple method for connecting a drip irrigation system to an outdoor faucet. To automate your watering schedule, add a Rain Bird hose-end timer.
          •  Includes a backflow preventer, a pressure regulator and a mesh filter
          •  Multi-function kit helps ensure the proper operation of your drip irrigation system
          • Drip Irrigation Fitting Type: Adapter
          • Connection: Female Hose Thread
          • Inner Diameter (in.): .58
          • Color Family: Blacks
          United States
          Oklahoma
          1/2 in. Barb Elbow (10-Pack)
          Prices start at : 4.49 USD / each

          Route water in drip and micro irrigation systems with the DIG Corp. This elbow changes the water's direction 90 degrees and features two 1/2 in. Barbed Tubing Elbow. Each connection offers dual barbed ends to ensure a strong, water tight fit.
          •  Brown color help blend in with the landscape
          •  Can be used with DIG's 1/2 in. brown drip-line model B18100
          • Material: ABS Plastic
          • Pressure Rating: 30
          • Fitting Type: Barb Fittings
          • Product Height (in.): 6.5
          United States
          Oklahoma
          Drip Full Pattern Bubbler on Stake
          Prices start at : 3.00 USD / each

          Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro bubbler flow and height. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover...
          •  Full circle coverage, 0 ft. - 3 ft. watering distance
          •  Adjustable flow rate of 0 - 13 GPH
          • Spray Pattern Degrees: 360 Degrees,Full Circle
          • Maximum Gallons Per Minute: .2
          • Package Quantity: 1
          • Gallons Per Hour: 13
          United States
          Oklahoma
          Drip 1 GPH Button Dripper (25-Pack)
          Prices start at : 7.37 USD / each

          Drip irrigation tubing or use in-line with 1/4 in. Non-pressure compensating. Medium-flow dripper for watering of garden plants, shrubs and small-medium size containers. Tubing for positioning near individual plants.
          • Barbed ends for direct insertion into the side of 1/2 in. drip irrigation tubing: Yes
          • Spray Pattern Degrees: Full Circle
          • Dripper Type: Button
          • Irrigation System Component: Drip Irrigation Emitter
          • Pressure Rating: 40
          • Tubing Size: Fits All Tubing Sizes
          United States
          Oklahoma
          1/2 in. (0.710 O.D.) x 100 ft. Poly Drip Irrigation Tubing
          Prices start at : 10.97 USD / each

          Made with premium quality polyethylene resins, DIGs 0.710 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations.
          • Pressure Rating: 80
          • Assembled Width (in.): 21 in
          • Outer Diameter (in.): .50
          • Manufacturer Warranty: 3 year warranty
          • Returnable: 90-Day
          • DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes): Yes
          United States
          Oklahoma
          1/2 in. x 100 ft. Eco-Lock Sprinkler Pipe
          Prices start at : 19.92 USD / each

          Sprinkler projects with Eco-Lock are faster, easier & greener than ever before. Up to 80% time savings when compared to traditional barb fittings. Orbit's Eco-Lock pipe and fittings are a revolutionary new way to install or repair irrigation systems and...
          •  Use only with Eco-Lock pipe
          •  Not for mainline use
          •  For non-mainline cold water outdoor irrigation connections only
          • Assembled Width (in.): 16 in
          • Assembled Height (in.): 5.0 in
          • Tubing Length (ft.): 100
          United States
          Oklahoma