Not recommended for securing ¼ in. Drip line or soaker hose. Micro tubing stake is ideal in securing button or flag drip emitters at the end of 1/4 in. Micro tubing with emitter near the plant, inside pots or baskets.
DIG's pipe thread preset pressure regulators reduce and regulate the incoming pressure of the household's water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.
✓ Made from durable, UV resistant materials for long life in the landscape
✓ Installs easily after the valve on a drip system
The DIG Universal Elbow is designed to connect any size of 1/2 in. Made from rugged, UV resistant plastic. Poly tubing regardless of tubing's specific inner or outer diameter. Provides a secure, water tight fit without the use of glues or special tools.
MPT x 17 mm barb adapter is used in the installation of DIG's and others 17 mm pressure compensating (PC) drip line. Used by home gardeners and professional alike, the brown barbed adapter is made of high impact plastic, and allows for the connection...
✓ Special, extra sharp barb design for secure and easy installation without glue or clamps
✓ Use with 1/2 in., 0.600 in. I.D. drip tubing or pressure compensating brown drip line
An internal silicone diaphragm provides a self-cleaning mechanism to keep drippers clog free. Labyrinth water passage regulates the flow of water to provide the most accurate and consistent irrigation despite pressure fluctuations and varying landscape...
✓ Operates reliably at any pressure between 10 and 55 psi
✓ Flow regulated for long runs of 1/2 in. poly tubing
The stakes also allow you to aerate and fertilize the roots and soil of your trees and plants. Green King Watering Stakes are designed to efficiently and effectively water your trees, shrubs, and plants directly at the roots.
✓ Good for new, established, and struggling trees
✓ Durable ABS plastic construction, specially engineered UV-protected cap designed for hammering into the ground with sledge hammer
Easily adjust the flow and saturation level by turning the head of the bubbler. This adjustable bubbler comes on a on a stake and with a barb connector for easy installation. The DIG 360-Degree Adjustable Mini-Bubbler emits uniform umbrella streams to...
Not only will it help maintain a healthy beautiful landscape which you can enjoy with your friends and family, but its most convenient and efficient way to water. Our line-up of fittings offer a faster, more convenient way to make more drip connections...
✓ Creates a connection between 3/4 in. female pipe thread and 1/2 in. or 5/8 in. drip irrigation tubing
✓ Constructed of highly durable UV and chemical-resistant materials to assure long life
✓ Connect 3/4 PVC to 1/2 Drip Tubing in 1 easy step
Durable construction provides years of reliable use. Ideal for spot watering trees and shrubs on uneven landscapes. This 1/2 GPH pressure compensating dripper delivers consistent water flow at varying water pressures.
Everything included for a complete installation. Low volume irrigation can show a significant reduction in water usage. The DIG Flower Bed Watering Kit is a complete system that is designed to be used to irrigate borders, planters, flower beds and under...
Flag drippers offer the posted flow rate with a line pressure of 25 psi. Twist open flag top can be removed for easy cleaning. The DIG 1 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system.
Pressure Rating: 25 psi
Gallons per Hour: 1
Angled barb inlet allows for simple installation: Yes
Tubing Size: 1/2"
Spray Pattern Degrees: 360 Degrees
Irrigation System Component: Drip Irrigation Emitter
DIGs Drip Zone Faucet Connection Kit with a 2-Way Splitter combines all the parts needed to start a drip irrigation system from a faucet including a 2-way hose splitter, backflow preventer, 25 psi pressure regulator and a 3/4 swivel adapter with a screen...
Product Length (in.): 10
Pressure Rating: 25
DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes): Yes
As your plants grow the flow can be increased as they require more water to flourish. Drip emitter watering radius is adjustable from a gentle stream pattern to drip and to off. The DIG Adjustable-Flow Multi-Stream Dripper offers controlled watering feature...
The DIG 3/4 in. Included is a 60-mesh screen to help filter out water impurities. Compression Fitting enables the connection of micro tubing to any 3/4 in. Installing the micro tubing into the compression fitting provides a secure, water tight fit without...
Package Quantity: 1
Material: ABS Plastic
Pressure Rating: 60
Outer Diameter (in.): .75
Connection: FHT x MHT
Constructed of UV resistant materials for long life in the landscape: Yes
Water your vegetable garden with the DIG Raised Bed Garden Drip Irrigation Kit. Everything is included for a complete installation. The kit includes 1/4 in. Drip-line with drippers built-in to the tubing.
✓ Use with 1/2 in. drip tubing and 1/4 in. barbs fittings including 25-PSI pressure regulator
✓ Kit has all the parts needed to cover up to 10 vegetables rows totaling 50ft long
✓ Easily installed, simple do-it-yourself project
✓ 2 outlets per each drip emitter helps to prevents clogging
Insert by hand or for faster installation in larger projects use the Rain Bird hole punch tool: HPUN1-1S (sold separately). Drip tubing for positioning near individual plants. Per hour medium-high flow rate flag Drip emitter with shutoff.
DIGs Mister with Memory-Flex Tubing operates at a minimum pressure of 30 psi to produce micro-sized droplets in a small diameter area when mounted above a plant. The tubing retains the position you set, allowing for complete versatility.