They can be used in-line with 1/4 in. 1.0 gph (gallons per hour) emitters are ideal for supplemental watering of individual plants. Distribution tubing. Tubing or inserted into the side wall of 1/2 in.
The DIG Adjustable-Flow Multi-Stream Dripper offers controlled watering feature to accommodate a variety of different plants within your system. As your plants grow the flow can be increased as they require more water to flourish.
✓ Multiple streams provide 360 Degree coverage
✓ 1/4 in. barb inlet for connecting micro tubing to 1/2 in. poly tubing
The DIG Micro Sprinkler is one of the most versatile low volume sprinkler available. Whatever your irrigation application may be you're completely covered. Four interchangeable heads are included that offer 90°, 180°, 360° and strip spray coverage.
Screen filter to protect it from clogging and a 25 psi pressure regulator to lower the incoming pressure to the suggested operating pressure for a drip system. Chemical and clog resistant, the drippers are an economical choice for systems with short lengths...
Sprays fine water droplets in a 360 full circle pattern and is easy to adjust for flow, and distance. Convenient plastic bag contains (2) black-colored spray nozzles. Rain Bird MSFF2PKS Drip Irrigation 10-32 Threaded Adjustable Fan Micro Spray Nozzle,...
✓ Offers finger-tip flow and distance control with a shut-off option
More drippers on a single line increase versatility and decrease complexity. RAINDRIP's turbulent flow PC (pressure compensating) drippers maintain their rated flow rate for 10 - 60 PSI inlet pressure.
Uses low-volume flow rates to ensure maximum soil absorption. The DIG Adjustable Sprayer on Spike provides an adjustable water flow to accommodate the various needs of plants throughout their life cycle.
✓ Fine spray pattern with a very small droplet size to decrease water runoff
✓ Rotation of the cap allows control of flow and the diameter of throw
Ideal for shrub plantings, trees, containers and flower beds. Rain Bird Micro Bubblers provide adjustable, low-volume watering up to a 3 ft.
✓ Simply twist cap to change spray distance and flow rate
✓ Total Satisfaction Policy
✓ Mounts on Rain Bird threaded riser stakes (models RISER-1PK or MPTRISER12 - purchased separately)
Maximum Gallons Per Minute: .4
Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
This full-pattern sprinkler nozzle fits 1/4 in. Use the Toro Blue Stripe Adjustable MicroSpray Drip Nozzle for your drip or micro-irrigation application. Additionally, the adjustable design allows you to customize the flow of the nozzle to meet your watering...
✓ Fits 1/4 in. tubing (not included)
✓ For drip or micro-irrigation applications
Pressure Rating: 30 psi
Spray Pattern Degrees: 360 Degrees,Full Circle
Manufacturer Warranty: 1 YR
Irrigation System Component: Drip Irrigation Emitter
And can be expanded using additional raindrip products. The raindrip Vegetable Garden Drip Kit waters up to 50 ft. This kit comes with everything you need to set up your drip watering system.
✓ Easy to customize or expand your system; you can add additional tubing, feeder lines and fittings to fit your drip system to your landscape; or add our newly designed timer to make watering automatic and stop watering by hand while keeping your plants healthy even when you're on vacation
✓ Kit has everything you need to get started with drip irrigation
✓ 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line
Barbed Tee is used to provide a secure connection of three pieces of 1/4 in. The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line.
Fitting Type: Barb Fittings
Drip Irrigation Fitting Type: Tee
Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit: Yes
The Blazing Fast Fittings 1 in. FPT Insert Elbow is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.
✓ Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe
✓ Slips easily into pipe without the need for tools, clamps, or extra fittings
✓ Friction loss is comparable to traditional insert fittings
✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
The DIG 360° Fan Spray Jet Sprinkler offers a low-volume, water saving solution to water flower beds and ground cover. Comes assembled with a fan spray jet, a 13 in. Slow application of water means less runoff and increased soil absorption.
✓ Pre-assembled with stake and riser for quick installation
✓ 360° coverage for water dispersal over a large area
The Blazing Fast Fittings 1 in. Insert Elbow is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.
Drip Irrigation Fitting Type: Coupling
Flow rates are comparable to traditional insert fittings: Yes
Outer Diameter (in.): 1.315
Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information
The Raindrip 15 sq. Full-Circle Adjustable Rotary Sprinklers are made in the USA. Adjustable diameter of up to 15 feet. These adjustable rotary sprinklers provide full-circle coverage for ground cover, hillsides, flower beds, new plantings and seed germination.
All necessary parts to start a system from a faucet or garden hose are included within the box. The kit can be expanded to cover more than 700 sq. DIG's ML50 Raised Bed Drip Kit is specially designed for planter boxes and vegetable garden layouts.
✓ Made from high quality, UV resistant materials
✓ Complete kit; covers up to 150 sq. ft. (can be easily expanded)
The DIG Drip and Micro Sprinkler Kit (model GE200) is a complete irrigation kit with all the parts needed to install a drip irrigation and micro sprayer system from a hose faucet (124 pieces including instruction).
✓ Feel good about not wasting water
✓ A discreet way to water your plants automatically
✓ Kit also includes 20, ¼ in. micro tubing stake, 10 ¼ in. tee, 12¼ in. barbs,10 ½ in. stake to hold the tubing to the ground,4, ½ in. tee, one, ½ in. coupling, 4 ½ in. elbow, hole punch, one set of 10 goof plug, and 8 hose end to close the end of the ½ in.
Punch tool are included in the convenient, easy to carry bucket, which can also be used to store all of your drip parts in 1 place. Fittings, PC drippers, stakes, and 250 ft. Save money and time with DIG's new drip system maintenance and repair bucket...
✓ Drip irrigation maintenance and repair expansion bucket features DIG's versatile, color-coded, pressure-compensating drippers in 3 flow rates (1, 2, and 4 GPH) to efficiently repair, add to, or modify your exiting drip system; the kit is economically priced well below the cost of the individual parts combined
✓ Maximum recommended flow using the 1/4 in. distribution, tubing: 12 GPH premium micro tubing (poly), length: 250 ft. with 0.170 I.D. x 0.250 O.D. PC drip emitter flow rates and color code: 1 GPH (4 LPH) color code - black 2 GPH (8 LPH) color code - green
The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Includes 100 ft. Easily convert a sprinkler riser to a 12-outlet drip system. Incorporating a Maverick drip manifold can save water while increasing your...
✓ Use with 1/8 in. or 1/4 in. micro tubing
✓ Provides 2 GPH flow rate from each outlet
✓ Can be used with 1/4 in. drip-line, DIG model SH50
✓ Features a removable nozzle for easy replacement and maintenance
The DIG 360° Jet Sprinkler on Spike ensures uniform saturation of a specified area. Comes assembled with spray jet, a 13 in. Micro tubing and barb connector. Slow application of water means less runoff and increased soil absorption.
Add a Drip watering line to an existing shrub head or 1/2 in. MPT 1-Port Manifold features an easy-clean filter that helps prevent clogged nozzles. Threaded riser. Female-threaded pipe fittings (sold separately).
The DIG 180-Degree Fan Spray Jet Sprinkler offers a low-volume, water saving solution to water flower beds and ground cover. Comes assembled with a fan spray jet, a 13 in. Slow application of water means less runoff and increased soil absorption.
✓ Color coded heads signify various spray patterns Constructed of UV-resistant plastic material
✓ Covers up to a 5 ft. radius
✓ Available in 90 degree, 180 degree and 360 degree coverage, the spray jet is recommended for watering that requires small droplets size with low precipitation rates
✓ Pre-assembled with stake and riser for quick installation
Ideal for flowers, mixed planting beds as well as gardens, each pop-up spray delivers 10 -13 GPH. Suggested operating pressure range is 20 - 50 psi. Drip irrigation tubing and features a patented rectangular micro spray pattern that adjusts with a click...