Water Pump Irrigation System

Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Delivery available Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Hours 687 Pyro Alarm and Auto Shut Down Rockford PTO unit...

This pressure regulator limits the inlet pressure to your soaker hose or Snip-n-Drip Soaker System to 10 PSI. You can still use an efficient low-pressure soaker hose system for watering your garden.

Designed for use with our Snip-n-Drip Soaker System, this three-way connector makes it easy to water two rows. Simply attach the solid hose to one side, and run two soaker hoses from the other two sides.

Add drip lines to additional planters, run longer lengths or replace 1/4" soaker hose and micro tubing in the Snip-n-Drip Pot and Planter Soaker System. Includes ​15' of 1/4" diameter micro soaker hose, 15' of 1/4" diameter PVC black tubing.

You can customize this convenient soaker hose system to suit your vegetable garden or any garden planted in rows. No special tools required — just use scissors to cut the hoses to the sizes you need.

Each connector pivots 180 degrees so you can position it as necessary to run hose up and over the side of a raised bed. Coupler accepts both 1/2" Snip-n-Drip Garden Hose and 1/2" Snip-n-Drip Soaker Hose.

Attach the coupler end to 1/2" Snip-N-Drip garden hose or 1/2" Snip-N-Drip soaker hose. Attach the quick-connect end to the Snip-N-Drip faucet adapter (hose and adapter not included).

We've brought the efficiency and effectiveness of professional drip irrigation to home gardens! You get 50' of unobtrusive, small-diameter drip line that provides slow drip action, giving plants the deep watering they need to thrive.

Snap the fittings in place and you're ready to water. No special tools required — just use scissors to cut the soaker hose to fit garden beds, and then cut the garden hose to fit between beds where you don't need water.

Each end cap has a connector that will accept 1/2” Snip-n-Drip Soaker Hose. Easy to install and re-useable. Designed for use with our Snip-n-Drip Soaker System, these end caps are handy when you are customizing your system, or use them as replacement...

Expand your Snip-n-Drip Soaker System with additional garden (non-soaker) hose. The 1/2" hose fits all our Snip-n-Drip fittings, sold separately.

Kit installs in minutes. Root-zone watering conserves water and keeps foliage dry, reducing disease problems. You get six stakes, 25 feet of 3/16" drip hose, 6 drip nozzles with clips, control valve, end cap and faucet connector.

Wheel irrigation removed from 250 acres of forage/row crops in Stanislaus county, California. 20 units of 1/4 mile wheel irrigation. Used but in good condition. $4,250 per unit or $80,000 for everything.

Designed for use with our Snip-n-Drip Soaker System, these extra couplers let you create more targeted watering zones. Easy to use; no tools required.

Use the fittings to secure the drip lines to the garden hose, and then use the quick-connectors to attach the pressure regulator and hose to a water source. We've brought the efficiency and effectiveness of professional drip irrigation to home gardens!...

Also included are six 180° heads that provide half-circle coverage up to 14' across and deliver one 1 gal. 6 sturdy sprinklers with built-in ground spikes and 360° nozzles deliver water in full circles up to 14' in diameter and can disperse 1 gal.

Expand your Snip-n-Drip Soaker System with 25' of additional soaker hose. The 1/2" black soaker hose fits all our Snip-n-Drip fittings, sold separately.

We've brought the efficiency and effectiveness of professional drip irrigation to your container garden! Potted plants need consistent water to thrive, but it's time-consuming to water by hand.

No special tools required — just use scissors to cut the hoses to the sizes you need. Customizable to fit any raised bed up to 4' high. Soaker hoses use up to 80% less water than sprinklers! Works best with a maximum water pressure of 10 PSI; we recommend...

Add drip lines to additional planters or replace lost parts from the Snip-n-Drip Pot and Planter Soaker System. Includes five micro 1/4" to 1/2" adapters and five micro T fittings.

Connectors have couplers at each end that will accept either 1/2” Snip-n-Drip Garden Hose or 1/2” Snip-n-Drip Soaker Hose. This kit allows you to water two raised beds from one Raised Bed Snip-n-Drip Soaker System, sold separately.

To attach to 20HP Lister diesel with counterclockwise rotation. Pumping water 2000 feet, need 90 psi capability for irrigation fields of barley Seeking lowest price for trial usage and potential multiple purchase.

Local new soccer fields are dying without water. Have pond nearby and a KYIRRIGATION reel. Need to pump up to 100 gpm at a head of 40 ft plus 40 psig. Have found suitable PTO pumps but have no tractor of sufficient horsepower.

Looking for a 100 to 300 Horsepower Dri-Prime pump in good working order for sale or rent for use in Kazakhstan. This is for immediate use and am also looking for Pipe and fittings.

Need a water pump capable of up to 500 gpm. Needed for frost protection ina vineyard. 3-phase preferred.

Used to boost 450 to 500 gallons per minute of well water into pivot sprinkler system. Peerless 8" booster pump with attached 10 HP U.S. Motors electric motor used for pivot sprinkler irrigation.

Essentially the WaterDog is a self-contained pumping platform that looks and acts much like a submersible/submarine. Each WaterDog can be custom built and configured to provide various large amounts of water the user/operator is needing.