Vertical Drills For Sale In United States

Tamrock self contained hydraulic drill with Deutz air cooled engine. Has 1185 impact hours. Good condition.

Drill is ready for work. Square boom, operator noise sheild, rear winch, and operator controls. MS-2A air track drill with Joy VCR360 hammer, Includes dust collector, but not installed.

CAT diesel engine.

One of a kind machine. Multi-Function Machine - Self-Erecting 57' Mast, Main Winch, Aux. Capable of High Torque Deep Drilling and can be set up for an Air-Hammer. All hydraulics have been completely serviced and/or repaired.

2.5 - 3.5 Inch Class* HD712 Drifter w/ 4,843 Percussion Hours* New Engine January 2010 w/ 6,890 Hours* Drifter redone each winter 10,453 Total Frame Hours

3.5 - 4.5 Inch Class* SP-3 Drifter* Cummins 5.9L Diesel - Installed New w/ Only 438 Hours* Enclosed Cab w/ AC Extendable Boom Rod Changer Unit Running T45 Drill Steel

EXW: TX $76,000 Financing available for all credit types. 1993 Texoma 270 Pier Drill Mounted on Ford F700 w/113,4000 miles, 2 1/2" kelly bar, 23' drill depth, Ford 300 gas motor w/?

Nice Low Hour Drill (Tier 3 Eng.)with 1050 CFM/125 PSI and 63,934 lbs. # 241-0020) Compressor: Sullair 1050 CFM/125 PSI P/N: 02250092-497) Mast: 30’ Carousel Capacity: 4 Total Drill Pipe Capacity: 5 Drill Pipe: (5) pieces 30’ X 6” X .75" Maximum Drilling...

DTH Class* 4.0" - 7.0" up to 140'ft Deep Without Reloading Carousel* And Greater Depth with Reloading* CAT 3406E (C15) Tier-II Turbo Charged After Cooled Diesel Engine Carousel Holds Six Rods 20'ft long Onboard Sullair Air Compressor Capable of operating...

2.5 - 3.5 Inch Class* TOYO TH800C Hydraulic Drifter* Powered By DEUTZ BF6L913 Diesel Engine* Extendable Boom Onboard Sullivan air compressor - 160 CFM @ 150 PSI Dry Dust Collector Miscellaneous TCD918E.pdf

DTH Class* CAT C-13 Tier III Diesel* Set Up For 4" Drill Pipe* Joystick Operated Rod Changer Carousel Water-Injection System Cyclone Dust Collector

Furukawa 900ES hydraulic drill with CAT 3126 engine with 3878 hrs and 1752 impact hrs. Set up for T-45 steel, 14' starter rod and 12' changes. Anti jam circuit and dust collector. Very good condition.

EXW: TX $67,000 Financing available for all credit types. 1992 Texoma 270 Pier Drill Mounted on 1990 International S1700 truck w/6 cyl International Diesel, 10 speed, 165K miles, 1/2" kelly bar, 14' drill depth, Drill run by John Deere 4 cyl diesel motor...

1993 Hughes Pier Drill Mounted on International S1700 V8 diesel 10 speed w, 27,354 miles, 2 1/2" kelly bar, 14' drill depth, w/4 cyl Detroit diesel in drill (Shows 290 hrs on meter) EXW: TX $52,000 Financing available for all credit types.

2008 Bauer BG18 Crawler Mounted Drill Rig with 3,955 hours. Has KDK and Kelly bar that come with the machine. 45.5 meter drilling depth, 118,000 pound operating weight. For more information, please call Rick Erzinger 314-315-0220

2008 Bauer BG40 Crawler Mounted Drilling Rig, 72 Meter Drilling Depth, Operating Weight 313,110 Pounds, 581 HP Cat C15 Tier 3, This comes with a KDK and a Kelley bar, other tools are available at additional fee.

Calweld Crane Mount Deep Foundation Rig, Model: 200CH Twin Detroit Power, 150'+ Digging Depth, Large Diameter Tooling, Very Low Hours Since New Excellent Condition

Texoma and Sterling Pressure Diggers, Diesel Power Pole packages, Very Low Hours Since New, 10-12' Digging Depth, Excellent Condition

Drifter Only* Surplus HL300 Drifter* Very Good Used HL300 Drifter from Commando 300 Rock Drill*

Drifter Only* HPR45 DRIFTER ONLY* NEW HPR45 DRIFTER*

1993 Texoma 270 Pier Drill 2 1/2" kelly bar, 23' drill depth, EXW: TX $87,000 Financing available for all credit types.

IT WILL BE READY TO WORK VERY SOON ASKING PRICE WAS $225,000.00 AFTER WE FINISH BUILDING THE AIR COMPRESSOR BUT WILLING TO SELL IT FOR $195,000.00 AS IS AND YOU FIX THE AIR COMPRESSOR DRILL IS LOCATED IN LANCASTER,CALIFORNIA

THIS DRILL RIG WAS STOLEN FROM 518 DOWELL RD, McHENRY, IL 60051. AS OF OCTOBER 20, 2012 I FOUND OUT THAT THIS DRILL WAS STOLEN FROM 518 DOWELL RD. PLEASE CALL 1-800-432-7257 EXT.823 Speed Star SS25K Drilling Rig TOP HEAD DRIVE WITH VARIABLE SPEED Mounted...

150' - 14' Diameter, Hyd Kelly Feed, Twin Detroit w/ Allison Auto Trans, Very Little Use Since New 3,000 Hrs Total Run Time

Give us a call at Sunrise Equipment today! PRICE REDUCTION!!!. A Texoma 800-90 on a 2008 Peterbilt truck.

YOU CAN SEE THIS MAST HAS THE ROTARY DRIVE WITH MOTOR AND TWO CAROUSEL LET ME KNOW IF YOU WILL BE INTERESTED I CAN OFFER YOU THIS COMPLETE DRILTECH MAST ONLY ( NO DRILL ) JUST THE MAST WHICH INCLUDE POWER HEAD, 2 CAROUSEL AND ALL YOU CAN SEE IN THE PICTURES...

EXW: TX $98,000. 1994 Texoma 600 Pier Drill Mounted on Mack Cabover Truck, 1563 hrs & 71K miles on Automatic Mack V6 Diesel, 40' drill depth, Drill run by Detroit 4 cyl diesel motor.