Vacuum Regulation Monitoring Vacuum Components For Sale In South Dakota

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). Stable and reliable vacuum is essential to the consistent operation of the milking system and...

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Part number "348-36" on schematic diagram.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Glycerine fill assures accuracy by providing a cushion against vibration.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 35 to 106 cfm (1,000 to 3,000 liters/min) and will maintain vacuum from 10” to 15” Hg (34 to 50 kPa).

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50...

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Fits assemblies with 7.5 to 10 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2.5" NPT.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Quart weighs 2.5 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge.

Replacement 12" Cover for Pre-Filters 160201, 160206, 160208, 160237 and 160238.

Gallon weighs 8 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge.

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Fits assemblies with 30 or 40 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 6" NPT.

Angle Brass Stall Cock; 3/8" thread.