Vacuum Regulation Monitoring Vacuum Components For Sale In Rhode Island

Overall dimensions 7" in diameter and 12.5" high. 3" Female NPT mounting connections. May be adjusted between 10" and 15". The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features...

Part number "348-35" on schematic diagram.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Factory calibrated for accuracy. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless...

Overall dimensions 5" in diameter and 12" high. 1.5" Female NPT mounting connections. May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Factory calibrated for accuracy. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel...

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Other fine features include... The Kaeser OMEGA23P is a 10HP tri-lobe style vacuum pump that weighs 100 lbs. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears...

It requires changing much less often than ordinary petroleum-based oils. Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps.

Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. Includes 2 each nipple adapter no.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT. Fits assemblies with 50 to 60 HP pump.

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.

Vacuum Pre-Air Filter with 6" pump connection for 6" single or duble vacuum line. Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that...

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

Measuring only 32" long x 21" wide x 37" high and weighing 450 lbs., the 10HP Kaeser Compact is shipped fully assembled complete with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

2HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460 voltage, and 3600 RPM. Washguard motors meet all applicable UL and CSA standards. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant...

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. FeaturingA a serial port and a variety of additional internal features, the Digimet...

The timer is easily programmed to deliver the precise amount of cleaner required for the pump, which in most cases is a very small amount. The Coburn Lobe Pump Wash System helps prevent the build-up of milkfat and other residues on the lobes of the vacuum...