Vacuum Regulation Monitoring Vacuum Components For Sale In Ohio

Stabilvac 6000 Monoblock Regulators weighs 3 lbs. Replacement filters available. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. DOS and WindowsA software isA included to allow numerical and waveform data to be...

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 3-7/8" in. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

May be adjusted between 10" and 15". 3" Female NPT mounting connections. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change...

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.

Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT.

Safety Valve for Stabilvac Seperate styles.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21.

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level...

Fits assemblies with 30 or 40 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 6" NPT.

Fits assemblies with 20 to 25 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 4" NPT.

Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller. Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter.

Angle Brass Stall Cock; 3/8" thread.

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

160219, black transflow hose, and 90 degree elbow. Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. Includes 2 each nipple adapter no.

Part number "348-11" on schematic diagram.

Part number "348-28" on schematic diagram.

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

If standard sizes are not suitable, we will customize a tank for you. Packaged in 350-lb. Mounting kit and 1-1/2” drain are included. Double-wall corrugated box with expanded polystyrene corner pads--UPS shippable.

Fits assemblies with 7.5 to 10 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2.5" NPT.

37' OVERALL LENGTH + TONGUE, 102" WIDTH, 6-AXLE, 3 FRONT AXLES STEERABLE, 12 WHEELS, SELF CONTAINED KOHLER DIESEL WITH MASPORT PUMP, 18'X7' ROUND TANK, 32' HOSE RACKS, 5' STEEL TOOL BOX ON PASSENGER SIDE

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level...