Vacuum Regulation Monitoring Vacuum Components For Sale In North Dakota

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Safety Valve for Stabilvac Seperate styles.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the...

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Factory calibrated for accuracy. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise...

1.5" Female NPT mounting connections. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Replacement filters available. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the...

For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Part number "348-36" on schematic diagram.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. DOS and WindowsA software isA included to allow numerical and waveform data to be...

3" Female NPT mounting connections. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Part number "348-35" on schematic diagram.

Vacum Pre-Air Filter with 6" pump connection for 6" single or duble vacuum line . Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Straight Silencer with 8" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 50 to 60 HP pump.

Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Gallon weighs 8 lbs.

Use with a standard automotive-type filter. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Includes 2 each nipple adapter no. 160219, black transflow hose, and 90 degree elbow.

Vacum Pre-Air Filter with 3" pump connection for 3" single or duble vacuum line . Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many...

Includes Filter cover, cartridge and base. Use with a standard automotive-type filter. Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover.