Vacuum Regulation Monitoring Vacuum Components For Sale In Memphis

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then...

Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

May be adjusted between 10" and 15". 1.5" Female NPT mounting connections. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change...

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Safety Valve for Stabilvac Seperate styles.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

May be adjusted between 10" and 15". 3" Female NPT mounting connections. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change...

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Part number "353-06" on schematic diagram.

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Dual scale, Hg and KPA. Factory calibrated for accuracy. Dial is 3-7/8" in. Glycerine fill assures accuracy by providing a cushion against vibration.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many...

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then...

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter. Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Specify length (up to 12 ft.) and number, size and placement of openings. Mounting kit and 11/2” drain are included. End caps feature a four inch solvent-weld and are domed for strength.

Double-wall corrugated box with expanded polystyrene corner pads. Pre-Air Filters are packaged in 350-lb. Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof.

Specify length (up to 12 ft.) and number, size and placement of openings. Mounting kit and 1-1/2” drain are included. If standard sizes are not suitable, we will customize a tank for you.

For 3-1/2" opening. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops.

Fits assemblies with 5 HP pump. Straight Silencer with 2" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.