Vacuum Regulation Monitoring Vacuum Components For Sale In Idaho

Replacement filters available. The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf).

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "348-35" on schematic diagram.

Part number "353-06" on schematic diagram.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Glycerine fill assures accuracy by providing a cushion against vibration.

FeaturingA a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

Fits assemblies with 30 or 40 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 6" NPT.

Fits assemblies with 5 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT.

Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. Kaeser Tri-Lobe Style Vacuum Pumps have improved vacuum-producing technology for reduced pressure pulsations and lower noise levels.

Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

37' OVERALL LENGTH + TONGUE, 102" WIDTH, 6-AXLE, 3 FRONT AXLES STEERABLE, 12 WHEELS, SELF CONTAINED KOHLER DIESEL WITH MASPORT PUMP, 18'X7' ROUND TANK, 32' HOSE RACKS, 5' STEEL TOOL BOX ON PASSENGER SIDE

Specify length (up to 12 ft.) and number, size and placement of openings. Double-wall corrugated box with expanded polystyrene corner pads--UPS shippable. If standard sizes are not suitable, we will customize a tank for you.

Part number "348-36" on schematic diagram.

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. Kaeser Tri-Lobe Style Vacuum Pumps have improved vacuum-producing technology for reduced pressure pulsations and lower noise levels.