The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.
Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.
The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.
Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.
Glycerine fill assures accuracy by providing a cushion against vibration. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.
The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.
3" Female NPT mounting connections. Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...
2" Female NPT mounting connections. Overall dimensions 6" in diameter and 11-1/4" high. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15".
Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.
The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...
In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.
Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.
The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. FeaturingA a serial port and a variety of additional internal features, the Digimet...
Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.
Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.
Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle. Double-wall corrugated box with expanded polystyrene corner pads.
Mounting kit and 1-1/2” drain are included. Will ship via UPS. If standard size is not suitable, we will customize a tank for you. End caps feature four inch solvent-weld and are domed for strength.
Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 7.5 to 10 HP pump. Straight Silencer with 2.5" NPT.
