Vacuum Regulation Monitoring Vacuum Components For Sale In Florida

Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Dual scale, Hg and KPA. Factory calibrated for accuracy. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

Dual scale, Hg and KPA. Factory calibrated for accuracy. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum...

Safety Valve for Stabilvac Seperate styles.

Part number "348-35" on schematic diagram.

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT. Fits assemblies with 50 to 60 HP pump.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Angle Brass Stall Cock; 3/8" thread.

Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter. Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller.

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.

Replacement 12" Cover for Pre-Filters 160201, 160206, 160208, 160237 and 160238.

Replacement End Cap for 15" tank with three 3" inlets.

• Works with most competing milk pumps - C-Face. • Special Moisture Resistant Interior Coatings. • 303 Stainless Steel Shaft. 1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy.

Includes 2 each nipple adapter no. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency. Use with a standard automotive-type filter.

For 2-1/2" opening. Grey Powder-Coat finish. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Other fine features include... Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job.

Anti-reversing valve has a rubber cap and comes with a hose clamp to fit 1.5 - 2" openings.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2.5" NPT. Fits assemblies with 7.5 to 10 HP pump.

Includes 2 each nipple adapter no. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency. Use with a standard automotive-type filter.