Vacuum Regulation Monitoring Milking Equipment For Sale In San Francisco

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Regulator has two washable replaceable filters. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.

The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. DOS and WindowsA software isA included to allow numerical and waveform data to be...

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

5/8" ID single clear plastic (blue tinted) Glitex Tubing for milk and vacuum lines.

Specifications: Case: Diameter 80mm, SUS304 Wetted parts: 316 stainless steel Medium: Incompatible gases and liquids Pressure Range: 0--80Mpa Pressure-unit shift: conversion among four units of MPa KPa Bar Psi Display: 4-digit LED, character height 18.00mm...

The success of the L02 is due in part to the state-of-the-art materials and the design of the valve plate and the slide which work together seamlessly and smoothly. The L02 is adjustable from 50 to 180 ppm over a vacuum range of 35 to 50 kPa (10 to 15...

L80 Interpuls Pulsator with 70:30 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

Twin 9/32" ID, 1/8" Wall, 24 lbs. Black Twin tubing has good flexibility and resistance to kinking, tears and splits.

L80 Interpuls Pulsator with 50:50 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

Strangko-Style Long Life Pulsator features durable unbreakable blue plastic housing. " Dustop " felt air filter has large surface area for excellent filtration of even microscopic particles.

L80 Interpuls Pulsator with 60:40 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21.

Fits assemblies with 5 HP pump. Straight Silencer with 2" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

The success of the L02 is due in part to the state-of-the-art materials and the design of the valve plate and the slide which work together seamlessly and smoothly. The L02 is adjustable from 50 to 180 ppm over a vacuum range of 35 to 50 kPa (10 to 15...

CARTON OF 100 FEET - Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible...