Vacuum Regulation Monitoring Milking Equipment For Sale In Nevada

Part number "353-06" on schematic diagram.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 3-7/8" in. Dual scale, Hg and KPA.

Overall dimensions 5" in diameter and 12" high. May be adjusted between 10" and 15". 1.5" Female NPT mounting connections. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct...

Part number "348-36" on schematic diagram.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Factory calibrated for accuracy. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount. Glycerine fill assures accuracy by providing a cushion against vibration.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". 3" Female NPT mounting connections. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller. Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter.

Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe. Washer included.

Fits assemblies with 20 to 25 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 4" NPT.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Twin 9/32" ID & 1/8" Wall, 25 lbs. Perfectly hygienic with a longer life span than other types of milk tubing when used properly, silicone tubing is as strong as plastic, more flexible than rubber, and can withstand -20° temperatures and boiling wash...

Fits assemblies with 15 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 3" NPT.

Strangko-Style Long Life Pulsator features durable unbreakable blue plastic housing. " Surematch " slide and valve system features new improved synthetic valve plate material for friction reduction and smooth interaction.

Other fine features include... The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. The Kaeser OMEGA41P is a 15HP tri-lobe style vacuum pump that weighs 201 lbs.

Siamese Black Rubber Tubing has good flexibility and resistance to kinking, tears and splits. Siamese style refers to two different tubing sizes conjoined, 1/4" ID and 9/16" ID.

Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT.

Number '22' on schematic diagram.

Black Twin tubing has good flexibility and resistance to kinking, tears and splits. Twin 1/4" ID, 1/8" Wall, 24 lbs.

Replacement Filter Cartridge for Fresh Air.