Vacuum Regulation Monitoring Milking Equipment For Sale In Indianapolis

May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to...

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

May be adjusted between 10" and 15". Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Safety Valve for Stabilvac Seperate styles.

Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum...

Part number "348-35" on schematic diagram.

Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed...

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter. Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller.

Part number "348-28" on schematic diagram.

Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

D#95 Pulsator (Parts interchange with LL90)

Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 9/32" ID, 17/32" OD, 20 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber.

Part number "348-36" on schematic diagram.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 3/8" ID, 5/8" OD, 25 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber.

Precise and consistent milking and massage phases are guaranteed with the new L02 Pulsator from Interpuls. The success of the L02 is due in part to the state-of-the-art materials and the design of the valve plate and the slide which work together seamlessly...

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 7/16" ID, 11/16" OD, 14 lbs. Transflow Vacuum Tubing significantly outperforms rubber.

Fits assemblies with 30 or 40 HP pump. Straight Silencer with 6" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking. L80 Interpuls Pulsator with 70:30 ratio now features long-life diaphragm material and smooth synthetic valve plate.

Siamese Black Rubber Tubing has good flexibility and resistance to kinking, tears and splits. Siamese style refers to two different tubing sizes conjoined, 1/4" ID and 9/16" ID.