Vacuum Regulation Monitoring Milking Equipment For Sale In Hawaii

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover.

Stabilvac Seperate 6000 weighs 3 lbs. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum...

Part number "353-06" on schematic diagram.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line...

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...

Stabilvac 6000 Monoblock Regulators weighs 3 lbs. This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa).

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Safety Valve for Stabilvac Seperate styles.

Part number "348-36" on schematic diagram.

Part number "348-35" on schematic diagram.

Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. FeaturingA a serial port and a variety of additional internal features, the Digimet...

It requires changing much less often than ordinary petroleum-based oils. Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps.

Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and...

Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking. L80 Interpuls Pulsator with 70:30 ratio now features long-life diaphragm material and smooth synthetic valve plate.

Compact and ergonomically rounded for easy handling, the 50/50 ratio, 4-exit L02 is simple to install and service takes just a few minutes. The main diaphragm is now molded of a new compound which is virtually impermeable, resists fatigue, and insures...

5/8" ID single clear plastic (blue tinted) Glitex Tubing for milk and vacuum lines.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...