Vacuum Regulation Monitoring Milking Equipment For Sale In Dallas

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Replacement filters available. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value),...

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...

Replacement filters available. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value),...

Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement filters available. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value),...

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

1/4" ID, 1/2" OD, 9 lbs. Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays...

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 6" NPT. Fits assemblies with 30 or 40 HP pump.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Glycerine fill assures accuracy by providing a cushion against vibration.

L80 Interpuls Pulsator with 50:50 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

L80 Interpuls Pulsator with 70:30 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. Other fine features include... Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly...

It is applied in various fields, such as petroleum, hydraulics, rubber and plastics, dyeing and printing, textile for pressure control and measurement. PD306 is a digital pressure gauge with one relay output and RS485 communication.

LL90 Style has stainless steel cover. " Dustop " felt air filter has large surface area for excellent filtration of even microscopic particles. Strangko-Style Long Life Pulsator features durable unbreakable blue plastic housing.

3/8" ID, 5/8" OD, 13 lbs. Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays...

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT. Fits assemblies with 5 HP pump.

Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

9/32" ID, 17/32" OD, 20 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.