Vacuum Regulation Monitoring Milking Equipment For Sale In Boston

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Part number "348-36" on schematic diagram.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Safety Valve for Stabilvac Seperate styles.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...

The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

Part number "353-06" on schematic diagram.

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

The L02 is also available in 2-exit styles and several different pulsation ratios. The main diaphragm is now molded of a new compound which is virtually impermeable, resists fatigue, and insures consistent pulsator operation.

L80 Interpuls Pulsator with 70:30 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

Blue Silicone Twin Vacuum Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria. Stays transparent and resilient longer than plastic tubing.

This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). Stable and reliable vacuum is essential to the consistent operation of the milking system and to...

Part number "348-28" on schematic diagram.

Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. 9/32" ID, 17/32" OD, 10 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and...

The L02 is also available in 4-exit styles and several different pulsation ratios. The main diaphragm is now molded of a new compound which is virtually impermeable, resists fatigue, and insures consistent pulsator operation.

Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. 7/16" ID, 11/16" OD, 14 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and...

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

" Dustop " felt air filter has large surface area for excellent filtration of even microscopic particles. LL90 Style has stainless steel cover. Strangko-Style Long Life Pulsator features durable unbreakable blue plastic housing.

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.