Vacuum Regulation Monitoring Milking Equipment For Sale In Arkansas

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "353-06" on schematic diagram.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set...

Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 3-7/8" in.

Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Regulator has two washable replaceable filters. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Stabilvac 6000 Monoblock Regulators weighs 3 lbs. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. Operating on the servo principle (where a separate sensor, the servo pilot...

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set...

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes...

Part number "348-36" on schematic diagram.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.

The L02 is also available in 4-exit styles and several different pulsation ratios. The main diaphragm is now molded of a new compound which is virtually impermeable, resists fatigue, and insures consistent pulsator operation.

Part number "348-28" on schematic diagram.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 5 HP pump. Straight Silencer with 2" NPT.

The Vacuum Pulsator for heavy duty working conditions Simple, reliable, variable-speed alternating pulsator " Dustop " air filter for improved filtration of microscopic dust particles Cover design for tighter fit " Surematch " slide & valve for less friction...

Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter. Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller.

Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and...

5/8" ID single clear plastic (blue tinted) Glitex Tubing for milk and vacuum lines.

Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Includes 2 each nipple adapter no. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency.