Vacuum Regulation Monitoring Milking Equipment For Sale In Alaska

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. DOS and Windows software is included to allow numerical and waveform data to be named,...

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Part number "353-06" on schematic diagram.

The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Quart weighs 2.5 lbs. Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures.

The Coburn Compact featuring the Kaeser Tri-Lobe Vacuum Pump is a vacuum pump assembly occupying a minimum amount of space in the milking barn or parlor. Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped...

Transflow Vacuum Tubing significantly outperforms rubber. 1/2" ID, 3/4" OD, 15 lbs. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays...

Twin 9/32" ID, 1/8" Wall, 24 lbs. Black Twin tubing has good flexibility and resistance to kinking, tears and splits.

Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe. Washer included.

Silicone Twin Vacuum Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria. Twin 9/32" ID & 1/8" Wall, 25 lbs. Stays transparent and resilient longer than plastic tubing.

The main diaphragm is now molded of a new compound which is virtually impermeable, resists fatigue, and insures consistent pulsator operation. The L02 is also available in 2-exit styles and several different pulsation ratios.

Pre-Air Filters are packaged in 350-lb. Vacum Pre-Air Filter with 4" pump connection for 3" single or duble vacuum line . Double-wall corrugated box with expanded polystyrene corner pads.

The most advantage of this controller lies that it can be programmed by HOT-KEY procedure. The most advantage of this controller lies that it can be programmed by HOT-KEY procedure, which is very convenient for mass production.

Part number "348-36" on schematic diagram.

Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. 3HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460 voltage, and 3600 RPM.