Vacuum Components Milking Equipment For Sale In North Carolina

This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with...

With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency. Use with a standard automotive-type filter.

Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme...

Part number "348-28" on schematic diagram.

Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency. Includes Filter cover, cartridge and base.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Glycerine fill assures accuracy by providing a cushion against vibration.

This 100 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof. Specify length (up to 12 ft.) and number, size and placement of openings.

Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. When supporting a vacuum level of 13.5", it spins at 4209 RPM at 85% speed, moves 252 CFM and has a noise level...

This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme...

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. When supporting a vacuum level of 13.5", it spins at 3574 RPM at 79% speed, moves 317 CFM and has a noise level...

Gallon weighs 8 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

• Special Moisture Resistant Interior Coatings. 1 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy. • USDA Epoxy Finish.

Angle Brass Stall Cock; 3/8" thread.

Straight Brass Stall Cock; 3/8" thread.

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.