Vacuum Components Milking Equipment For Sale In New York

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 7.5 to 10 HP pump. Straight Silencer with 2.5" NPT.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

It is easily installed on most lobed vacuum pump systems and is available with 120/230V electrical components to match the milking equipment automatic wash system. Of chemical tubing.

Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter. Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Washguard motors meet all applicable UL and CSA standards. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact name plate.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. When supporting a vacuum level of 13.5", it spins at 4735 RPM at 82% speed, moves 116 CFM and has a noise level of 88 dB.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover.

.Vacum Pre-Air Filter with 4" pump connection for 4" single or duble vacuum line . Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle.

Replacement End Cap for 15" tank with three 3" inlets.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21.

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Features green plastic body with replaceable foam filter. Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators.

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.

The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary. For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description.

• Stainless Steel “Full Fact Nameplate. • Dual Voltage 115/230. • Special Moisture Resistant Interior Coatings. • 303 Stainless Steel Shaft. • All Stainless Steel Screws.

• Stainless Steel “Full Fact Nameplate. • Dual Voltage 115/230. • Special Moisture Resistant Interior Coatings. • 303 Stainless Steel Shaft. • All Stainless Steel Screws.

Part number "348-36" on schematic diagram.

Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Three-Jar Dispenser includes hot and cold water valves, 25 ft. Jars have a capacity of 30 oz.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary. For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT...