Vacuum Components Milking Equipment For Sale In New Jersey

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Straight Silencer with 8" NPT. Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Replacement Drain - 1 1/4"

Part number "348-35" on schematic diagram.

Part number "348-28" on schematic diagram.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance,...

Grey Powder-Coat finish. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. For 2-1/2" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

A cap is included for closing off the unused vacuum line in single configurations. Vacuum Pre-Air Filter with 6" pump connection for 4" single or duble vacuum line. Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as...

DOS and WindowsA software isA included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Replacement Blank End Cap for 15" tank.

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

Pre-Air Filters are packaged in 350-lb. Vacum Pre-Air Filter with 3" pump connection for 3" single or duble vacuum line . Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Pre-Air Filters are packaged in 350-lb. .Vacum Pre-Air Filter with 4" pump connection for 4" single or duble vacuum line . Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof.

Black Polymer Vacuum Drain Valve closes at very low vacuum and drains liquid efficiently. For 3/4" thread.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Rust-inhibiting and will not form sludge. Quart weighs 2.5 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures.

Replacement Filter Cartridge for Fresh Air.

Straight Brass Stall Cock; 3/8" thread.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Grey Powder-Coat finish. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. For 2-1/4" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Heavy duty Drawer-Style Stainless Steel Jetter Rack includes nuts and bolts for mounting. Fits all claws including DeLaval.