Vacuum Components Milking Equipment For Sale In Kentucky

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 20 to 25 HP pump. Straight Silencer with 4" NPT.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

When supporting a vacuum level of 13.5", it spins at 3574 RPM at 79% speed, moves 317 CFM and has a noise level of 90 dB. The Kaeser OMEGA41P is a 25HP tri-lobe style vacuum pump that weighs 273 lbs.

The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

• All Stainless Steel Screws. • Drains in End shield. • 303 Stainless Steel Shaft. 1-1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy.

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. Washguard motors meet all applicable UL and CSA standards. 2HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460...

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Case of 4 gallons.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators. Features green plastic body with replaceable foam filter.

Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Grey Powder-Coat finish. For 3-1/2" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Replacement Drain - 1 1/4"

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Grey Powder-Coat finish. For 4-1/4" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

This 50 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof. Mounting kit and 1-1/2” drain are included.

When supporting a vacuum level of 13.5", it spins at 4261 RPM at 85% speed, moves 190 CFM and has a noise level of 89 dB. The Kaeser OMEGA41P is a 15HP tri-lobe style vacuum pump that weighs 201 lbs.

Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Grey Powder-Coat finish. For 2-1/2" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. CIP components are sold individually, or as part of complete kit. Hardware is included.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

When supporting a vacuum level of 13.5", it spins at 4209 RPM at 85% speed, moves 252 CFM and has a noise level of 90 dB. The Kaeser OMEGA41P is a 20HP tri-lobe style vacuum pump that weighs 238 lbs.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Replacement End Cap for 15" tank with 1-1/4" drain opening.

A cap is included for closing off the unused vacuum line in single configurations. Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that...