Vacuum Components Milking Equipment For Sale In Kansas

Fits assemblies with 5 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT.

Straight Brass Stall Cock; 3/8" thread.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

• Stainless Steel “Full Fact Nameplate. • Works with most competing milk pumps - C-Face. • USDA Epoxy Finish. • Dual Voltage 115/230. • Special Moisture Resistant Interior Coatings.

May be adjusted between 10" and 15". The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

This is the Spanish-language version with instructions, labels and readout in Spanish. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings,...

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36...

May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Dual scale, Hg and KPA. Factory calibrated for accuracy. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

Fits assemblies with 30 or 40 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 6" NPT.

Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe.

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact name plate. Leeson Washguard motors are designed and built for extended life in the wet, humid environment of...

Replacement Filter Cartridge for Fresh Air.

Replacement Drain - 1 1/4"

Vacuum Pre-Air Filter with 6" pump connection for 4" single or duble vacuum line. A cap is included for closing off the unused vacuum line in single configurations. Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic...

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

It requires changing much less often than ordinary petroleum-based oils. Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps.

• Stainless Steel “Full Fact Nameplate. • Works with most competing milk pumps - C-Face. • USDA Epoxy Finish. • Dual Voltage 115/230. • Special Moisture Resistant Interior Coatings.

Replaces Milk-Rite 7101. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

If standard size is not suitable, we will customize a tank for you. Mounting kit and 11/2” drain are included. End caps feature a four inch solvent-weld and are domed for strength.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups.

110V Motor f/Depend-O-Drain

Replaces Milk-Rite 7103. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.