Vacuum Components Milking Equipment For Sale In Chicago

Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller. Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter.

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration.

Straight Silencer with 6" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 30 or 40 HP pump.

Part number "353-06" on schematic diagram.

Use with a standard automotive-type filter. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency.

Case of 4 gallons. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe. Washer included.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise...

They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact name plate. 3HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460 voltage,...

Part number "348-35" on schematic diagram.

For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram.

Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.

The Coburn Lobe Pump Wash System helps prevent the build-up of milkfat and other residues on the lobes of the vacuum pump and protects the pump from rust and corrosion. It is easily installed on most lobed vacuum pump systems and is available with 120/230V...

The Kaeser OMEGA41P is a 15HP tri-lobe style vacuum pump that weighs 201 lbs. When supporting a vacuum level of 13.5", it spins at 4261 RPM at 85% speed, moves 190 CFM and has a noise level of 89 dB.

Angle Brass Stall Cock; 3/8" thread.

For 3-1/2" opening. Grey Powder-Coat finish. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Replacement Filter Cartridge for Fresh Air.

Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.

Part number "348-28" on schematic diagram.

May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to...

This is 40 Gallon Vertical Balance Tank with stand. End caps feature four inch solvent-weld and are domed for strength. Mounting kit and 1-1/2” drain are included. Specify length (up to 12 ft.) and number, size and placement of openings.

Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps. It requires changing much less often than ordinary petroleum-based oils.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the...

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.